Sparky-(Admin) 21,315 #1 Posted September 5, 2022 Ok, kind of a lame topic. But cleaning up in the garage and shed on this Labor Day holiday and I discovered I have quite a few rear hitches. Couple different ones so why not share with pics. I know folks have been modding the rear draw hitch since the first one was produced a zillion years ago. The one on my 308 musta had a bagger support piece that some lazy fellow just cut off! 5 3 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #2 Posted September 5, 2022 Is that a custom pintle hitch you made or no also do you think it could handle pulling a small military army tanker trailer Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #3 Posted September 5, 2022 Just now, The Freightliner Guy said: Is that a custom pintle hitch you made or no also do you think it could handle pulling a small military army tanker trailer If your referring to the last pic it’s a 2” hitch receiver. Military stuff is always heavily built so my answer is no to towing the army tanker trailer you mentioned based on its possible weight. It might be towable but probably not stoppable. 1 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #4 Posted September 5, 2022 It’s maybe about 10- 12ft from rear to the front of the hitch Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #5 Posted September 5, 2022 Couple more…back end of my 1054 and 867. Plus I have a couple spare 8 speeds here with the hitch still on em! 4 1 1 Share this post Link to post Share on other sites
ineedanother 1,369 #6 Posted September 5, 2022 Nothing special but a couple ready for a fresh coat of paint... 2 2 Share this post Link to post Share on other sites
Moparfanforever 844 #7 Posted September 5, 2022 Got this setup on my 702. 2 4 Share this post Link to post Share on other sites
sjoemie himself 3,068 #8 Posted September 5, 2022 1 hour ago, Sparky said: That is a... interesting setup.. Might I suggest we refer to this hitch as 'EL DIABLO' in the future 3 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #9 Posted September 5, 2022 10 minutes ago, sjoemie himself said: That is a... interesting setup.. Might I suggest we refer to this hitch as 'EL DIABLO' in the future LOL! It’s a neat piece. Has a 1-1/4” receiver and a mean lookin hook all held together with a nasty weld (but probably plenty strong) . Can’t recall how I ended up with it 1 Share this post Link to post Share on other sites
sjoemie himself 3,068 #10 Posted September 5, 2022 2 minutes ago, Sparky said: Can’t recall how I ended up with it You didn't sell your soul for it now did ya'!? 3 Share this post Link to post Share on other sites
squonk 41,104 #11 Posted September 5, 2022 Here's one you don't see a lot of. Tiller hitch 2 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #12 Posted September 5, 2022 8 minutes ago, squonk said: Here's one you don't see a lot of. Tiller hitch Never seen that one before. Is it tractor specific, like for a GT14 or something? Share this post Link to post Share on other sites
squonk 41,104 #13 Posted September 5, 2022 1 minute ago, Sparky said: Never seen that one before. Is it tractor specific, like for a GT14 or something? It was on a Raider 12 1 Share this post Link to post Share on other sites
ineedanother 1,369 #14 Posted September 6, 2022 Reminds me of the other stuff I need to be taking care of... 1 Share this post Link to post Share on other sites
Retired Wrencher 5,454 #15 Posted September 6, 2022 Mike we are going have to call you the hitch man now, but cool looking set ups. Share this post Link to post Share on other sites
Racinbob 11,077 #16 Posted September 6, 2022 14 hours ago, Sparky said: Never seen that one before. Is it tractor specific, like for a GT14 or something? It's for an earlier style tiller like the 7-1211. That tiller had a two belt drive. One to an idler setup mounted just in front of the transmission, the second from that point to the tiller. You had to move the right footrest out and add a second belt guard. A pain. On the plus side you didn't have to remove the slot hitch to mount the tiller. It actually connected to the tiller to lift it. I used that style of tiller for years on my 76 but I modified it to use the later style belt drive. It was easier to mount/dismount than the newer style. The downside it that the snowblade I had wouldn't work with that axle bracket but that didn't matter as I used the 84 tractor for the blade. 1 Share this post Link to post Share on other sites
Retired Wrencher 5,454 #17 Posted September 6, 2022 Nothing special! But it is a working hitch. 4 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #18 Posted September 6, 2022 My set up… 1 2 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #19 Posted September 6, 2022 Hey @SylvanLakeWH what do you use that setup in the first pic for is looks like the hook on a chain what do you use it for towing dragging? Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #20 Posted September 6, 2022 Just now, The Freightliner Guy said: Hey @SylvanLakeWH what do you use that setup in the first pic for is looks like the hook on a chain what do you use it for towing dragging? Yes. Quick chain or strap hook up. Also, that E-141 is my go to tug for the SL&WHN RR. When in a parade I have other WH’s as well. I can easily hook them together in case of break downs… I have a strap that I carry just for that purpose.. you can see it wrapped in the second pic. 1 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #21 Posted September 6, 2022 I love the wheel barrow 1 Share this post Link to post Share on other sites
