Searcher60 209 #1 Posted August 26, 2022 Does anybody know the part number for the 2 seals in the Electro hydraulic controller? I know I can get them from Wheel Horse Parts and more, which I did several months ago. But, I have miss placed them and cannot find them. I’d like to go to a supplier and just buy the two seals today because it started leaking really bad. So if anybody has the manufactures part numbers I would appreciate it. Best wishes Share this post Link to post Share on other sites
pfrederi 17,685 #2 Posted August 26, 2022 Dash # 116 and # 026 (i use 026S easier to install). PM your address I will mail the two.... 1 Share this post Link to post Share on other sites
Searcher60 209 #3 Posted August 26, 2022 1 hour ago, pfrederi said: Dash # 116 and # 026 (i use 026S easier to install). PM your address I will mail the two.... Not those, but the two same size little seals that go in the cylinder raise/lower controller for the mower or whatever attachment you are using. Thanks! Share this post Link to post Share on other sites
Searcher60 209 #4 Posted August 26, 2022 Ok, after days of searching, I finally found the ones I purchased months ago from Wheel Horse More. Thanks! Man I am glad I found them! Share this post Link to post Share on other sites
