Retired Wrencher 5,435 #1 Posted August 22, 2022 I been enjoying every minute on this. Gathering parts cleaned from the front pin to the rear hitch. She is not perfect but. This had three colors on it with a clear coat gone bad on the top sides of the engine. Now it is two because of the P/O painted the outside parts a darker color may be burgundy? Things like this consume me = time. But I have a lot of that. This is my third 1257 I have always like these very much. IT IS THE START UP. I hope you enjoy the picks. 2 12 1 Share this post Link to post Share on other sites
squonk 41,010 #2 Posted August 22, 2022 I see the J bolts on the right side of the engine. Threaded holes not in the pan so you can bolt it from underneath? 1 Share this post Link to post Share on other sites
ebinmaine 67,180 #3 Posted August 22, 2022 Beautiful machine. I'll be looking forward to see how this one gets finished up. 2 Share this post Link to post Share on other sites
Retired Wrencher 5,435 #4 Posted August 22, 2022 (edited) 1 hour ago, squonk said: I see the J bolts on the right side of the engine. Threaded holes not in the pan so you can bolt it from underneath? Mike these have no function, also this is going to be a garage queen. I had one like this one time. Just thought it looks cool. Adding a little bling LOL. Edited August 22, 2022 by Retired Wrencher Share this post Link to post Share on other sites
Retired Wrencher 5,435 #5 Posted August 22, 2022 (edited) 10 minutes ago, ebinmaine said: Beautiful machine. I'll be looking forward to see how this one gets finished up. Thanks Eric. The rear fender and the hood are already done by the P/O with new decals on it. So, I will leave it like it is. Edited August 22, 2022 by Retired Wrencher 1 Share this post Link to post Share on other sites
EB-80/8inPA 1,618 #7 Posted August 22, 2022 Nice dash there, too. 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,294 #8 Posted August 22, 2022 She looks great! Looking forward to the finished product 1 Share this post Link to post Share on other sites
Thegearhead0324 1,255 #9 Posted August 23, 2022 Very nice 1257! Really like the red center caps with logo. Share this post Link to post Share on other sites
Retired Wrencher 5,435 #10 Posted August 23, 2022 13 hours ago, EB-80/8inPA said: Nice dash there, too. Thanks. That was done by P/O. Share this post Link to post Share on other sites
Retired Wrencher 5,435 #11 Posted August 23, 2022 13 minutes ago, Thegearhead0324 said: Very nice 1257! Really like the red center caps with logo. Thank you. I do not like painting, but I thought about for a while. Decided to do it. Share this post Link to post Share on other sites
Retired Wrencher 5,435 #12 Posted August 23, 2022 10 hours ago, Sparky said: She looks great! Looking forward to the finished product Thanks Mike. As you know very enjoyable hobby to do this. If you have to. Take care. Share this post Link to post Share on other sites
