mhlmeader 689 #1 Posted August 21, 2022 Hi folks, brought this home with me today. Going in, I already knew there were alot of unoriginal things done to the tractor. I got it as a fun project to try and fit a little diesel on. So my questions are what kind of hubs and axle are these from? They have been welded to the tranny. I couldn't figure out why someone would do that till I found the welded crack under the tranny, maybe they were beefing it up? I dunno. Also, the front spindles and steering linkage!!! Whoa!!! Anywho, I knew it weren't original by any stretch, anybody have any insight on the parts? Thanks, mike 2 1 Share this post Link to post Share on other sites
Pullstart 62,905 #2 Posted August 21, 2022 Well how bout that… 1 Share this post Link to post Share on other sites
mhlmeader 689 #3 Posted August 21, 2022 6 minutes ago, Pullstart said: Well how bout that… Share this post Link to post Share on other sites
wallfish 17,011 #4 Posted August 21, 2022 Someone went to town on the trans. Probably made it bigger to add real bearings as the originals were just bronze bushings and most likely worn. If it works like it is then why fix it if it ain't broke. The front spindles are home made to accept those trailer hubs. It started out as a 1960 400 or 550 4 Share this post Link to post Share on other sites
ebinmaine 67,570 #5 Posted August 21, 2022 Rugged lookin buggah. 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #6 Posted August 21, 2022 I admire the persons skillset that modified that tractor, possibly a former tank mechanic? That's a keeper! 2 Share this post Link to post Share on other sites
19richie66 17,508 #7 Posted August 22, 2022 Looks like axles and tube ends off of a dana 20 groundsmaster axle welded to the side plates. If it works, run it. The front I still question 1 Share this post Link to post Share on other sites
Heatingman 971 #8 Posted August 24, 2022 Is that an elevated work platform? I like it! Share this post Link to post Share on other sites
mhlmeader 689 #9 Posted August 24, 2022 5 hours ago, Heatingman said: Is that an elevated work platform? I like it! Yes, I got it a year or so ago when I was doing some work on a motorcycle, has a detachable ramp, pneumatic up/down, takes up alot of space, but much nicer than working on the floor:) 1 Share this post Link to post Share on other sites
