Thompson1276 256 #1 Posted July 31, 2022 I have a 1966 wheel horse 1276 the parking brake knob broke and I cannot find one anywhere the same style it runs a stove bolt between it but is plastic the one side broke from use if anyone can help that would be great thank you Share this post Link to post Share on other sites
daveoman1966 3,752 #2 Posted July 31, 2022 New from dealers...2 pc. Part 8693 and part 8722 Find them here: https://www.rcpw.com/lookup/# Be sure to select 'Toro Consumer' for parts lookup. 3 1 Share this post Link to post Share on other sites
Thompson1276 256 #3 Posted August 1, 2022 7 hours ago, daveoman1966 said: New from dealers...2 pc. Part 8693 and part 8722 Find them here: https://www.rcpw.com/lookup/# Be sure to select 'Toro Consumer' for parts lookup. It’s a rare tractor only 800 made so I found nothin but I might have to find a junkyard of wheel horses thanks for that anyways man worth a try Share this post Link to post Share on other sites
Jeff-C175 7,202 #4 Posted August 1, 2022 18 minutes ago, Thompson1276 said: I found nothin You looked on the site that Dave posted? This isn't what you need? Kinda pricey I guess. I made my own. Aluminum... adds a little 'bling' Share this post Link to post Share on other sites
Damien Walker 246 #5 Posted June 16, 2023 Would be a fairly straightforward lathe project or even 3D printer...though the finish quality might not be quite so good with the latter. Other than the colour, it also looks near identical to the knobs on the hydro clutch lever on the C-175....that might might be much more common. 1 Share this post Link to post Share on other sites
Lee1977 6,663 #6 Posted June 16, 2023 If you just need something to pull it up with plastic or nylon 1/4" pipe. Share this post Link to post Share on other sites
