EnHanceHorse 1 #1 Posted July 29, 2022 Hello - I have a 97 520-H. Currently it’s only running on one cylinder. I’ve done a few things but I need the space and need to get rid of it. I believe it to be a valve seat issue. It has a 60” deck and a plow. 700hrs. Paint is less than average. What is a reasonable offer I should list it as in the ohio market? Appreciate it Share this post Link to post Share on other sites
Pullstart 62,905 #2 Posted July 29, 2022 My buddy Matt is pretty good at knowing the value of these… @Bow_Extreme 1 Share this post Link to post Share on other sites
953 nut 55,296 #3 Posted July 29, 2022 It will be difficult to interest the average buyer in a or any other brand when it has mechanical problems and the cosmetic condition is less than desirable. If it has the gear reduction steering that would be a big plus, people here may buy it just for that feature. You probably would be best off listing it in our classified section rather than local listings. Perhaps $400 OBO would would be a good starting point, others may have different opinions. 4 Share this post Link to post Share on other sites
Snoopy11 5,714 #4 Posted July 30, 2022 200-250$ would be my offer... Don 1 Share this post Link to post Share on other sites
8ntruck 7,016 #5 Posted July 30, 2022 A reasonable offer is one that both the seller and buyer agree on. Decide you much you think it is worth, then keep an open mind when offers come in. If no offers come in, rethink how much you think it is worth. Good luck. 6 Share this post Link to post Share on other sites
Bow_Extreme 544 #6 Posted July 31, 2022 97’ is the last year for the 520H. It has a swept axle and gear reduction steering. Many want this option. Some steering setups are considerably worn while some are perfect. The engine is not worth repairing. However, it is good for parts. Muffler, carb, intake, stator, coil, ignition pickup module, etc, are all desired by many to keep their engines running. The 60” deck and mule drive are worth some money but if spindles are damaged, it’s difficult to repair or replace. The plow is also a nice option but it depends on condition and if all parts to use it are with it Essentially, you are offering a roller tractor with a deck and plow. Finally, the cost of fuel, trailer expenses, and time are considered in. On average, it costs me $100-$200 to pickup a tractor. That’s just my costs and no time considered. That being said, I would think $300 - $400 is fair. Taking the time to part out will net you more but again, that takes time, tools, and knowledge. 3 Share this post Link to post Share on other sites
EnHanceHorse 1 #7 Posted August 4, 2022 Thank you all. It’s listing this week for $400. 1 Share this post Link to post Share on other sites
