Fuse block bypass?

[Bradshawn 49]

Good evening I’m in the process of tearing down a c-81 have some broken wires in the fuse block. I’m trying to source a replacement with no such luck. Is Another configuration possible? As far as twinning wires together and using inline fuses? I’m not too familiar with electrical work. I’m a dumb welder 😂

[Achto 28,194]

Here is one option for you.

https://www.ebay.com/itm/224443123860?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1DG1yrb3HT76R36niXWmG5A47&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=224443123860&targetid=&device=c&mktype=pla&googleloc=9019452&poi=&campaignid=17597089569&mkgroupid=&rlsatarget=&abcId=9300988&merchantid=101681445&gclid=CjwKCAjwrNmWBhA4EiwAHbjEQHDdeqWEVfTny7sbnNCwt1a583cHny-6_rJG-gEo6y5C4SNYY7MOnhoCf2AQAvD_BwE

[Bradshawn 49]

5 minutes ago, Achto said:

Here is one option for you.

https://www.ebay.com/itm/224443123860?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1DG1yrb3HT76R36niXWmG5A47&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=224443123860&targetid=&device=c&mktype=pla&googleloc=9019452&poi=&campaignid=17597089569&mkgroupid=&rlsatarget=&abcId=9300988&merchantid=101681445&gclid=CjwKCAjwrNmWBhA4EiwAHbjEQHDdeqWEVfTny7sbnNCwt1a583cHny-6_rJG-gEo6y5C4SNYY7MOnhoCf2AQAvD_BwE

Great! I wasn’t aware I could use a automotive fuse block. Thank you very mich

[Achto 28,194]

The more water proof the better.

[Jeff-C175 7,203]

1 minute ago, Bradshawn said:

Great! I wasn’t aware I could use a automotive fuse block. Thank you very mich

 

If you wanna stay original, check with Lincoln at AZ tractor (see vendor forum here for contact info)

[Bradshawn 49]

21 minutes ago, Jeff-C175 said:

 

If you wanna stay original, check with Lincoln at AZ tractor (see vendor forum here for contact info)

I don’t mind not staying original on this but I’ll check them out thanks 

[Jayzauto 89]

GEvening Bradshawn,

 

 

https://wheelhorsepartsandmore.com/product/fuse-block-replacement-67-7160/

 

Here is the fuse box I used on several of my tractors.   It's OEM style, Very Simple to install, has everything you need, worx great and available from a vendor that advertises here.. Great people to deal with

 

 

GLuck, Jay

 

 

[Bradshawn 49]

18 minutes ago, Jayzauto said:

GEvening Bradshawn,

 

 

https://wheelhorsepartsandmore.com/product/fuse-block-replacement-67-7160/

 

Here is the fuse box I used on several of my tractors.   It's OEM style, Very Simple to install, has everything you need, worx great and available from a vendor that advertises here.. Great people to deal with

 

 

GLuck, Jay

 

 

Oh and it has the ends too that’s sweet and 2 extra slots I can add lights ?! 

[lynnmor 7,482]

Just Google Dorman 85668 and buy according to price or convenience.

 

This cap is expensive, but it will protect the fuse block.

Edited July 20, 2022 by lynnmor

[peter lena 8,976]

@Achto   @Bradshawn  agree with you on the automotive  fuse block set up , why not install something better ? wiring and faulty connections are a major area of disfunction , , would also add a wiring reroute , and wiring cable wrap , to eliminate chafing  / shorting connection areas . while you are doing that , insure / verify a ground connection cable from battery cable ground  bolt down point , don't think  its grounded , add a wire to the area . use an alligator test clip wire to insure ground function , then hard wire it . only a suggestion . stay grounded , pete