Cee245 818 #1 Posted July 14, 2022 (edited) Has anyone run into this before? I have a factory replica foot control from @drjarvisphd121and I have tried and failed to adjust the neutral creep... Today I finally figured out WHY! Notice in the picture where the little motion rod (part #108904) is over an inch longer? I had picked up a replacement rod and bearing ends at the Show from AZ tractor cuz mine were a little worn... Sometimes I can't leave well enough alone! I didn't know that there were different lengths. I figured the controls on all Eaton 1100s were the same. I guess I'm wrong. No wonder I was so confused lol! Edited July 14, 2022 by Cee245 Add pic 2 Share this post Link to post Share on other sites
Handy Don 12,445 #2 Posted July 14, 2022 1 hour ago, Cee245 said: I didn't know that there were different lengths. I figured the controls on all Eaton 1100s were the same. I guess I'm wrong. Yep, those "look the same but are subtly different" parts can really bite you! Been there and done it. Glad you found it! 1 Share this post Link to post Share on other sites
