Dave 1953 70 #1 Posted July 3, 2022 I got a 7-1232 tiller in a package deal and I have no need for it. The gent I purchased the WH equipment had a single sheave pulley tied on the tiller and said it was needed to make the tiller work. I advertised it and a gent came over to pick it up and said that it was the wrong pulley and that it took a double pulley instead. He did not want it without that pulley and showed me one on Ebay for 113.00. I have the parts manual for this tilled and I can't find any double pulley associated with it. Does anyone out there know who is right on the matter and if it does indeed take a double pulley somewhere can you furnish me with a p/n. Thanks a bunch. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,036 #2 Posted July 3, 2022 After reading the instructions looks like the tiller came with a shaft and bearing to extend the transmission input shaft and the single pully gets added to the shaft so it looks like a double pulley but just two pulleys on the same shaft assembly. 1 Share this post Link to post Share on other sites
