Blasterdad 2,692 #1 Posted June 25, 2022 This has to stop! Unfortunately it won't, chronic bug bite, no known cure... 5 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #2 Posted June 25, 2022 Here's hoping it never does! Share this post Link to post Share on other sites
peter lena 8,634 #3 Posted June 25, 2022 @Blasterdad, NICE , if nothing else , give it a lubrication spray down or linseed oil rub down , to immediately feed that starved paint and help its recovery , also stop rust , no sanding , just a thorough paint soak down , let sit a day , clean cloth rub down , do it again from that dry stage you can use a cleaner wax , if you want to . or leave it , till your mechanical is done . that works , pete Share this post Link to post Share on other sites
Blasterdad 2,692 #5 Posted June 26, 2022 15 hours ago, 1995 520H+96+97 said: 1997 Yep, got from original owner who bought it brand new in '98, going back to get the plow for it, (never used)! 1 Share this post Link to post Share on other sites
Pullstart 62,905 #6 Posted June 26, 2022 23 hours ago, Blasterdad said: This has to stop! How for? Share this post Link to post Share on other sites
RandyLittrell 3,884 #7 Posted June 26, 2022 My wife threatening to cut my dangly parts off, has slowed my buying!!!! Randy 4 Share this post Link to post Share on other sites
Wheelhorse#1 1,667 #8 Posted June 26, 2022 15 minutes ago, RandyLittrell said: My wife threatening to cut my dangly parts off, has slowed my buying!!!! Randy She’s just bluffing or the dangle would be gone already…buy more stuff ! 1 Share this post Link to post Share on other sites
RandyLittrell 3,884 #9 Posted June 26, 2022 9 minutes ago, Wheelhorse#1 said: She’s just bluffing or the dangle would be gone already…buy more stuff ! She stabbed my with a fork in the leg early in our marriage, I'm not chancing it!!!!! Randy 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #10 Posted June 26, 2022 On 6/25/2022 at 10:44 AM, AMC RULES said: Here's hoping it never does! Not a chance! Share this post Link to post Share on other sites
Blasterdad 2,692 #11 Posted July 1, 2022 Today's haul, another C-160 Automatic I was told this poor girl sat outside for 10 years, the sun baked the paint off her right down to the primer, hardly rusted at all though, weird... She will have a better life here with her sisters. 1 1 Share this post Link to post Share on other sites
OutdoorEnvy 1,522 #12 Posted July 1, 2022 It’s like you’re in the twilight zone…but in a good way. Nice grab Share this post Link to post Share on other sites
adsm08 2,067 #13 Posted July 1, 2022 You think you have problems, I am actively trying to not buy more tractors, and my wife won't stay off facebook looking for more tractors. 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #14 Posted July 1, 2022 1 minute ago, adsm08 said: You think you have problems, I am actively trying to not buy more tractors, and my wife won't stay off facebook looking for more tractors. Reverse support group, that is rough! Said I was done for a while with the 520 H haul & look what I found having my morning coffee... I definitely don't need any encouragement! Lol. Share this post Link to post Share on other sites
adsm08 2,067 #15 Posted July 1, 2022 1 minute ago, Blasterdad said: Reverse support group, that is rough! Said I was done for a while with the 520 H haul & look what I found having my morning coffee... I definitely don't need any encouragement! Lol. She was chasing like four WHs earlier this week. I had to tell her to expect six months of food shortages over the winter just to get her to stop tractor shopping. That may have been a miscalculation, because it may end up costing me more. Share this post Link to post Share on other sites
Blasterdad 2,692 #16 Posted July 1, 2022 (edited) 9 minutes ago, adsm08 said: She was chasing like four WHs earlier this week. I had to tell her to expect six months of food shortages over the winter just to get her to stop tractor shopping. That may have been a miscalculation, because it may end up costing me more. Fortunately for me I usually just get the ol' eye roll from SWMBO, but 2 in less than a week... might turn into the ol' stink eye... Lol Edited July 1, 2022 by Blasterdad Share this post Link to post Share on other sites
Blasterdad 2,692 #17 Posted July 1, 2022 11 hours ago, OutdoorEnvy said: It’s like you’re in the twilight zone…but in a good way. Nice grab Getting more "Twilight Zone" by the minute. ID plate says Model N 1-0421 6 According to the Model list #'s this is a 1971 Bronco 14 Automatic. Appears to have all original stickers & has the front tach-a-matic as the Bronco didn't. It does have the hood ornament & flip back seat pan like the Bronco though. Maybe 1st production run at the Pond factory using up surplus parts??? Share this post Link to post Share on other sites
wallfish 17,011 #18 Posted July 1, 2022 8 hours ago, Blasterdad said: Appears to have all original stickers But the primer indicates it's been re-painted. Share this post Link to post Share on other sites
8ntruck 7,016 #19 Posted July 1, 2022 I'll agree with @wallfish there. Maybe the front tach-a-matic was dealer installed? Share this post Link to post Share on other sites
Blasterdad 2,692 #20 Posted July 1, 2022 Starting to think this is a Frankenstien Horse, from what I can find in the pic gallery the '74's still had the hood ornament & flip back fender pan, but had went to the 2 spoke steering wheel by then. ID plate was also moved to the left side of the console tower above the lift mechanism, & the center tower plate had an angled plate with the voltae regulator & ammeter in it. It appears that a PO had access to "parts", she has these 6" wheels that are too narrow for the spindles, but just happen to have an original year- correct pair of wheels I just picked up looking for a new home. Also freed up the motor, I think the PTO side bearing was a little bit stuck, some PB Blaster down the the side & in the cylinder & she came loose pretty easily. Pulled the head to investigate & she looks really good, no scratches or scoring & no ridge at the top, cleaned & oiled her up... 1 Share this post Link to post Share on other sites
ineedanother 1,369 #21 Posted July 2, 2022 Nice find! My '76 c-160 might not be original but has no hood ornament, the tag is on the left above the hydro valve, 3-spoke steering wheel. That cylinder looks great, the 6" wheels, not so much 1 Share this post Link to post Share on other sites
Moparfanforever 851 #22 Posted July 2, 2022 Just like the rest of us, you are going down that long , deep , dark rabbit hole of no return. Enjoy the ride!! 1 Share this post Link to post Share on other sites
Moparfanforever 851 #23 Posted July 2, 2022 My wife when I say I am going to get another WH , Full on Thermonuclear Meltdown, Godzilla style. 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #24 Posted July 2, 2022 55 minutes ago, ineedanother said: Nice find! My '76 c-160 might not be original but has no hood ornament, the tag is on the left above the hydro valve, 3-spoke steering wheel. That cylinder looks great, the 6" wheels, not so much Thanks, as I said, I picked up a pair of original wheels at a local tractor show a few weeks ago, they just found a new home! Another shocking twist of destiny in... The Twilight Zone... Share this post Link to post Share on other sites
ineedanother 1,369 #25 Posted July 2, 2022 2 hours ago, ineedanother said: Nice find! My '76 c-160 might not be original but has no hood ornament, the tag is on the left above the hydro valve, 3-spoke steering wheel. That cylinder looks great, the 6" wheels, not so much I have to correct myself as I just looked and my '76 c-160 has a 2-spoke steering wheel. 1 Share this post Link to post Share on other sites
