Blasterdad 2,692 #26 Posted July 22, 2022 (edited) Just got her engine all back together today & started her up. One shot of gas in the carb & she fired up instantly & idled like a purring kitten. Took her for a test drive around the yard to warm her up & run her. Transmission is strong & smooth, so far a very happy Horse. Brought her back in the shop & changed her oil, about to go for another ride. I'm going to hate letting this one go.... Edited July 22, 2022 by Blasterdad 5 Share this post Link to post Share on other sites
Moparfanforever 850 #27 Posted July 22, 2022 Kohler 16HP , Hydrostat , Hydraulic Lift , doesn't get any better !!! Looks good!! 1 1 Share this post Link to post Share on other sites
c-series don 8,718 #28 Posted July 23, 2022 Does the hour meter work? 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #29 Posted July 23, 2022 14 minutes ago, c-series don said: Does the hour meter work? It does now, I hooked it back up when I checked out all the wiring & hydro controls. I have no idea if this tractor only has 40 hours on it but it sure runs like it does! Owner said it had been rebuilt, but either way it runs like new. Like I said, gonna have seperation anxiety seeing this one go to her new home, Lol. 2 Share this post Link to post Share on other sites
Wheelhorse616 4 #30 Posted July 23, 2022 Hello Everyone, I recently did a full restoration on my 312-8 I was wondering if anyone knows of any shows in nj or in pa that is relatively close, shows within two hours of north jersey in particular. I would like to enter it into a show to see if I could win a reward for the work I have done and that I am very proud of. If anyone knows about any shows or has any idea on where to find shows, It would really appreciate it. Thanks. 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #31 Posted July 25, 2022 I got slowed down this morning in a good way, made a short trip & picked up this beauty. 1995-96 42" Rear Discharge deck, great shape, hardly been used, just dirty. I've had my eye out for one for a while & finally got lucky. Last on the list is a 60" & I'll have every size deck made. I did manage to get a little done on the C-160, tightened up the parking brake lever with a new cotter pin & washer, (old one was easy to get out, it fell apart when I touched it, Lol). Primed & painted the belt cover, will let harden a few days while I replace axle & stub shaft seals. 4 Share this post Link to post Share on other sites
ineedanother 1,369 #32 Posted July 25, 2022 Nice find on the deck and the belt guard looks like it's in great shape too! 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #33 Posted August 16, 2022 Getting closer, down to the details. They say money can't buy happiness.... Then how do you explain NEW PARTS !!! ( & ice cream ). 3 1 3 Share this post Link to post Share on other sites
Handy Don 12,233 #34 Posted August 17, 2022 16 hours ago, Blasterdad said: NEW PARTS YES! 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #35 Posted August 19, 2022 Pulled rear hub to today to change the seal, I've NEVER had one fight me this hard... It didn't win. After cooling off & a trp to the hardware store for new screws I put the dash plate back on. It was cracked & I repaired it from the back, then I had my Mother paint it for me, you're never too old to ask Mom for help. Thanks Mom! ( I told her she didn't have to do the electric clutch because it doesn't have one ) 5 2 Share this post Link to post Share on other sites
ebinmaine 67,564 #36 Posted August 20, 2022 23 hours ago, Blasterdad said: NEVER had one fight me this hard I had one took two WEEKS of tightening with the impact wrench, heat, cool, penetrating oil, repeat.. Not sure if it makes you feel any better... 🤪 Share this post Link to post Share on other sites
Blasterdad 2,692 #37 Posted August 21, 2022 4 hours ago, ebinmaine said: Not sure if it makes you feel any better... 🤪 Actually it does, two weeks... WOW 1 Share this post Link to post Share on other sites
ebinmaine 67,564 #38 Posted August 21, 2022 8 hours ago, Blasterdad said: Actually it does, two weeks... WOW Sometimes patience is key. That... And having extra parts. It wasn't a transmission I needed to have done right then. It had time to soak and re-soak. Share this post Link to post Share on other sites
Blasterdad 2,692 #39 Posted August 21, 2022 6 minutes ago, ebinmaine said: Sometimes patience is key. I agree, but in my mind this hub had given me the middle finger & told me to go urinate up a rope. When inanimate objects talk back to me it's on & poppin'. I was patient with the SpeedEx though, it took about 2 weeks to free up the steering column, but that was understandable, poor girl had sat outside in the rain for years. More of a "Help Me" conversation... 1 Share this post Link to post Share on other sites
ebinmaine 67,564 #40 Posted August 21, 2022 26 minutes ago, Blasterdad said: in my mind this hub had given me the middle finger & told me to go urinate up a rope. When inanimate objects talk back to me it's on & poppin'. I've definitely been there. I was told many years ago that in order to succeed in life we must be more intelligent than the object we are trying to conquer. Hence... I am regularly defeated by cardboard. 1 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #41 Posted August 21, 2022 2 minutes ago, ebinmaine said: I am regularly defeated by cardboard. Humility is another trait that helps us succeed in life! Great reply, love it! 1 Share this post Link to post Share on other sites
peter lena 8,632 #42 Posted August 21, 2022 @Blasterdad take advantage of that deck condition , would totally spray it down with an aerosol lubricant , especially underside . would also have it on a chain hoist , so you can easily look things over , stand it on rear deck wheels at angle to soak in the lube , carefully clean it , sharpen blades with a small fine file , clean cloth lubricant wipe down , patina / paint saving , replace deck idler pulley , with same size wide bearing side shields , repack , lucas xtra hd chassis grease , would also clean out and repack those mule drive bearings , very easy , if you set this up correctly , it will run quietly and smooth for as long as you want . lubrication detail every function , what an opportunity , picked up one like that , years ago , smooth and quiet . changed deck wheels to 7" , do not substitute on the grease , lucas , x-tra heavy duty , chassis , green / white tube , all bearings , no whining failure noise , pete Share this post Link to post Share on other sites
Blasterdad 2,692 #43 Posted October 23, 2022 Done & delivered to her happy new owner. She got to kick up her heels in the garden today, didn't even break a sweat, runs & tills like new! 2 12 Share this post Link to post Share on other sites
ebinmaine 67,564 #44 Posted October 23, 2022 NIIIIICE!! 1 Share this post Link to post Share on other sites
peter lena 8,632 #45 Posted October 23, 2022 @Blasterdad not only nice , but the crisp / bright lights indicate a good ground , like the patina retaining look , maybe a lubricant rub down ? been experimenting with cnc 2-26 electrical aerosol as well as mineral oil on my paint , both safely retain paint , even did my CENTRAL AC , unit outside , spray it down , let it soak , clean cloth rub down , looks very good for 35+ years old , pete Share this post Link to post Share on other sites
Blasterdad 2,692 #46 Posted October 23, 2022 8 minutes ago, peter lena said: not only nice , but the crisp / bright lights indicate a good ground , like the patina retaining look Thank you, headlight bezel grounded directly to frame. I wanted her to retain her patina too, rubbed her down with WD. 1 Share this post Link to post Share on other sites
peter lena 8,632 #47 Posted October 23, 2022 @Blasterdad , typically that frame grounding is corroded or painted over , since adding a ground cable to my battery ground cable bolt point and then to engine / frame corner , that has eliminated electrical issues . keep it sparky , pete Share this post Link to post Share on other sites
Pullstart 62,905 #48 Posted October 23, 2022 Catching up on the thread, why did you have to let it go? Share this post Link to post Share on other sites
Blasterdad 2,692 #49 Posted October 23, 2022 1 minute ago, Pullstart said: Catching up on the thread, why did you have to let it go? I found it for a friend I grew up with, she knew I was big into Wheel Horses & asked if I had a rototiller for her garden. After seeing my collection she decided she wanted one of her own, so I found this one for her, she bought it & I went through it for her top to bottom. Her list of attachments has grown over the summer too, rototiller, front mower deck, mid mower deck, snow plow, snow blower, wheel weights & chains, & snow cab. I retain visitation rights though, Lol. 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #50 Posted October 23, 2022 Perfect patina. 1 1 Share this post Link to post Share on other sites
