peter lena 8,625 #1 Posted June 7, 2022 https://www.amazon.com/Palmetto-Packing-Extractor-flexible-non-removeable/dp/B00887BPVU/ref=asc_df_B00887BPVU?tag=bingshop looking at break seal removal , for @Kevippolito , made for tight work , if you have a needle punch , just make a small hole on seal side face . screw in puller and pull out . you can use a deep socket or a piece of plastic pipe as a driver to reset the new seal , pete 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #2 Posted June 7, 2022 Thanks for sharing, Somehow I would like me a glass of wine 2 1 Share this post Link to post Share on other sites
953 nut 55,224 #3 Posted June 7, 2022 I just use an old sheet metal screw and a pair of vise-grip pliers. Share this post Link to post Share on other sites
adsm08 2,056 #4 Posted June 8, 2022 56 minutes ago, 953 nut said: I just use an old sheet metal screw and a pair of vise-grip pliers. Same. I usually have the luxury of a slide-hammer too. Share this post Link to post Share on other sites
