What is the front pulley size for a WH Raider 12

[Wheeliehorseman 0]

I am trying to find the OEM front pulley size also what is the best way to unlock a rear end, it won't shift it has been sitting for awhile 

Edited April 16, 2022 by Wheeliehorseman

[953 nut 55,746]

9 hours ago, Wheeliehorseman said:

what is the best way to unlock a rear end, it won't shift it has been sitting for awhile

Since your Wheel Horse has been sitting long enough to have the shift rails rust in place there is probably a lot of other issues to be dealt with in there. Drain the fluid (drain plug is near the back and requires a 1/4" Allen Wrench) and remove the transmission so it can be opened up.

This thread from @stevasaurus will guide you through the process and if you need information along the way that is what we are here for.

 

 

[gwest_ca-(File Mod) 11,090]

12 hours ago, Wheeliehorseman said:

I am trying to find the OEM front pulley size

Gear transmissions with 1-1/8" crankshaft use 4" OD engine pulley #7466.

[Wheeliehorseman 0]

On 4/16/2022 at 6:39 AM, 953 nut said:

Since your Wheel Horse has been sitting long enough to have the shift rails rust in place there is probably a lot of other issues to be dealt with in there. Drain the fluid (drain plug is near the back and requires a 1/4" Allen Wrench) and remove the transmission so it can be opened up.

This thread from @stevasaurus will guide you through the process and if you need information along the way that is what we are here for.

 

 

Thank you I will check it out