entropy 104 #1 Posted April 8, 2022 I am going to pull my deck this weekend in order to replace drive belt and either sharpen or replace blades. I was wondering if anyone had info on the belt part number and/or length of belt as well as the best replacement blades for deck(as well as part number for those as well) Thanks in advance for the help Dave Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,036 #2 Posted April 8, 2022 You should have the deck model number to get the correct blades but the belts will be the same. Share this post Link to post Share on other sites
entropy 104 #3 Posted April 8, 2022 Thank you for the links, I went through the manuals section and I did not see my year model and width. Must have been me man looking as you found them no problem. No new blades needed. The blades are so robust that I just used the angle grinder until I got a good edge. The belt I will still replace and grease gun the spindles Share this post Link to post Share on other sites
Lee1977 6,648 #4 Posted April 8, 2022 (edited) Takes a Toro # 94-2501 -1/2" v-belt length 103" for the mule drive, The 48" deck Toro # 1594 -1/2" v-belt length 107".. Edited April 8, 2022 by Lee1977 2 Share this post Link to post Share on other sites
entropy 104 #5 Posted April 9, 2022 Thanks Lee! Just ordered the aramid belt Share this post Link to post Share on other sites
