ecsi635j 34 #1 Posted April 7, 2022 (edited) Hello All Its been quite awhile since my last post .I recently came across a Wheel horse C-161 which in need of a brake band. I'm pretty sure they are no longer available. I remember finding and talking to a collector restorer who also sold wheel horses might any one know who this my have been I just can not bring back to mind. As a side note I did find a brake band on ebay for a c125 wheel horse I believe this model was a hydro is this band interchangeable? Edited April 7, 2022 by ecsi635j 1 Share this post Link to post Share on other sites
squonk 41,320 #2 Posted April 7, 2022 Do you need the complete band or just the lining? 1 Share this post Link to post Share on other sites
ecsi635j 34 #3 Posted April 7, 2022 Wow squonk thanks so much for the quick reply. I would really like to get ahold of the complete assembly only because I dont know if I have the means to replace just the lining. again thank you. Share this post Link to post Share on other sites
rmaynard 15,595 #4 Posted April 7, 2022 (edited) The C-125 band is the same as the C-161. Part #9593 However, the one on eBay appears to have the lining coming loose. If you buy it, you will have to re-glue it before you can use it. Edited April 7, 2022 by rmaynard 1 Share this post Link to post Share on other sites
sparkys toy 76 #5 Posted April 8, 2022 McMaster car sells the banding by the foot ,a little epoxy and a small piece of pvc and clamps or duct tape and your good to go Share this post Link to post Share on other sites
