857lover 291 #1 Posted April 5, 2022 i have my transmission apart and i changed the bearing and now my buddy @danweikert21 is telling me that there are timing marks that should line up on the differential bull gear and the big gear in the middle but i don’t think that’s the case and i’m not sure what to do because i don’t want to put it together wrong and it’s a six speed trans 1 1 2 Share this post Link to post Share on other sites
ebinmaine 67,492 #2 Posted April 5, 2022 Just now, 857lover said: timing marks Uhhh.. Nope... 2 Share this post Link to post Share on other sites
danweikert21 166 #3 Posted April 5, 2022 April fools Dylan 3 Share this post Link to post Share on other sites
857lover 291 #4 Posted April 5, 2022 1 minute ago, danweikert21 said: April fools Dylan donr belive this guy 3 Share this post Link to post Share on other sites
Handy Don 12,218 #5 Posted April 5, 2022 2 minutes ago, 857lover said: donr belive this guy I'm impressed that he thought of the idea! He gets points. You get points for cross-checking. 3 4 Share this post Link to post Share on other sites
kpinnc 12,026 #6 Posted April 11, 2022 Aviation units in the military often send new techs looking for spools of flight line, buckets of rotor wash, and chem light batteries. Shocking how many fall for it. Was your buddy in the military? He seems to think like a vet... 1 Share this post Link to post Share on other sites
ebinmaine 67,492 #7 Posted April 11, 2022 5 minutes ago, kpinnc said: Aviation units in the military often send new techs looking for spools of flight line, buckets of rotor wash, and chem light batteries. Shocking how many fall for it. First full-time job I ever had was at a pallet factory. A buddy of mine and I applied and were hired within a couple days of each other. I had messed around with bicycles some and done minor car repairs by then but he had no real world mechanical experience or aptitude. He came about half jogging by one day and asked if I had seen a particular tool and to be honest it didn't even absorb until later.... The boss had him going around asking everybody and their mother's mother's Uncle if they had seen the Board Stretcher. Not. One. Person. Told him anything. 1 1 4 Share this post Link to post Share on other sites
Handy Don 12,218 #8 Posted April 11, 2022 Well, I haven't seen my left-handed adjustable wrench for some time. Been wondering where it could be.... 2 2 Share this post Link to post Share on other sites
WHX?? 48,815 #9 Posted April 11, 2022 On 4/5/2022 at 6:08 PM, ebinmaine said: Uhhh.. Nope... Minus points for EB for not telling him all the gears in there have timing marks. ... now go git me that metric crescent wrench and fifty feet of chow line. 3 Share this post Link to post Share on other sites
Handy Don 12,218 #10 Posted April 11, 2022 On my last trip to Italy I looked at metric crescents--but they were kinda pricey. 2 Share this post Link to post Share on other sites
squonk 41,105 #11 Posted April 11, 2022 Still looking for my can of compression! 2 3 Share this post Link to post Share on other sites
lynnmor 7,306 #12 Posted April 11, 2022 5 hours ago, Handy Don said: On my last trip to Italy I looked at metric crescents--but they were kinda pricey. You need to be careful when selecting wrenches, so that they will handle both SAE and metric. 1 1 4 Share this post Link to post Share on other sites
kpinnc 12,026 #13 Posted April 12, 2022 22 hours ago, squonk said: Still looking for my can of compression! Or a case of displacement... 3 Share this post Link to post Share on other sites
Snoopy11 5,714 #14 Posted April 12, 2022 The real question here, ladies and gents... is whether @danweikert21 actually BELIEVED that there were timing marks... We may never know... BUT... notice... post 3 occurs AFTER post 2... @ebinmaine... Don't forget... your tires also have timing marks when you put them back on the hubs... @857lover Don 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #15 Posted April 12, 2022 12 minutes ago, kpinnc said: Or a case of displacement... Or a stroke of luck... Don 3 Share this post Link to post Share on other sites
Horse Newbie 7,069 #16 Posted April 12, 2022 Every good sheet metal mechanic has a pipe stretcher and a duct stretcher on his truck… problem is a new apprentice can’t ever find them… 4 Share this post Link to post Share on other sites
ebinmaine 67,492 #17 Posted April 12, 2022 4 hours ago, kpinnc said: Or a case of displacement... Displacement is fairly easy. Ever'body knows displacement is increased by a quotient of roughly 3 to 1 for every vertical inch of rear wing height. 4 Share this post Link to post Share on other sites
kpinnc 12,026 #18 Posted April 13, 2022 23 minutes ago, ebinmaine said: Ever'body knows displacement is increased by a quotient of roughly 3 to 1 for every vertical inch of rear wing height. That seems to be the theory... 3 Share this post Link to post Share on other sites
ebinmaine 67,492 #19 Posted April 13, 2022 5 minutes ago, kpinnc said: That seems to be the theory... See now clearly. This vehicle has at LEAST a 700 cube POWERPLANT and has far exceeded even so much as the understanding of anyone. At all. Ever. 2 Share this post Link to post Share on other sites
AHS 1,440 #20 Posted April 13, 2022 On 4/11/2022 at 5:39 PM, lynnmor said: You need to be careful when selecting wrenches, so that they will handle both SAE and metric. @lynnmor That’s just for metric use! Don’t use it on anything standard!😂 1 Share this post Link to post Share on other sites
lynnmor 7,306 #21 Posted April 13, 2022 2 hours ago, AHS said: @lynnmor That’s just for metric use! Don’t use it on anything standard!😂 You didn't look close enough. 1 Share this post Link to post Share on other sites
Handy Don 12,218 #22 Posted April 13, 2022 1 hour ago, lynnmor said: You didn't look close enough. Yep, darned wrench want's to have it both ways 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #23 Posted April 13, 2022 16 hours ago, ebinmaine said: This vehicle has at LEAST a 700 cube POWERPLANT and has far exceeded even so much as the understanding of anyone. At all. Ever. I second that. I present exhibit "B" Examine the stickers on the side... Don 1 Share this post Link to post Share on other sites
Jeff-C175 7,202 #24 Posted April 13, 2022 10 minutes ago, Snoopy11 said: Examine the stickers I guess your eye is healing well ! You can actually read those ? Or do you speak "Pixellation" fluently ? 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #25 Posted April 13, 2022 1 hour ago, Jeff-C175 said: I guess your eye is healing well ! You can actually read those ? Or do you speak "Pixellation" fluently ? Oh, is it blurry to you as well? I thought my right eye was starting to fail me... Don 1 1 Share this post Link to post Share on other sites