RJ Hamner 1,007 #1 Posted February 22, 2022 Does anyone have a picture of or the dimensions of the weight/ballast box for a KwikWay loader. Bob Share this post Link to post Share on other sites
Poppa Phill 61 #2 Posted February 22, 2022 1 hour ago, RJ Hamner said: Does anyone have a picture of or the dimensions of the weight/ballast box for a KwikWay loader. Bob I will measure mine and grab a couple pics tonight. I took it off before I brought the 522 to my shop in town for axles seals and bearings OH Joy! If it's not dark when I get home will do this evening otherwise be in the morning if someone else doesn't get it done.. 1 Share this post Link to post Share on other sites
RJ Hamner 1,007 #3 Posted February 22, 2022 Great. Thanks Bob Share this post Link to post Share on other sites
lynnmor 7,302 #4 Posted February 22, 2022 Mine is in a dark place right now but if you don’t have the dimensions in a day is so, get back. When fabricating one, consider a very large angle on the rear bottom corner so it doesn’t dig in when reversing from a pile. Also consider adding a door to dump gravel so that you can add or subtract weight easily. 2 Share this post Link to post Share on other sites
JCM 9,130 #5 Posted February 22, 2022 28 minutes ago, lynnmor said: When fabricating one, consider a very large angle on the rear bottom corner so it doesn’t dig in when reversing from a pile. Share this post Link to post Share on other sites
JCM 9,130 #6 Posted February 24, 2022 21'' height x 15 1/4'' width x 15 1/4'' deep @RJ Hamner Share this post Link to post Share on other sites
RJ Hamner 1,007 #7 Posted February 27, 2022 On 2/24/2022 at 10:31 AM, JCM said: 21'' height x 15 1/4'' width x 15 1/4'' deep @RJ Hamner Thanks 1 Share this post Link to post Share on other sites
Poppa Phill 61 #8 Posted March 1, 2022 On 2/22/2022 at 12:15 PM, RJ Hamner said: Does anyone have a picture of or the dimensions of the weight/ballast box for a KwikWay loader. Bob I'm tardy. That weather we had was warn it flooded x2 8n the last couple weeks and I didn't remember till the email notification said Hey Stupid You FORGOT SOMETHING!🤣😅🤣 Here's the picks. The box is all metal bottom framed with 2inch angle iron. Ca)Ed the wife to rem8md me to measure it again when I get home. My apologies, the aneurysm fried my memory circuits. If I do create a reminder for stuff it gets lost! Share this post Link to post Share on other sites
RJ Hamner 1,007 #9 Posted March 1, 2022 thanks Is that what I think it is on top the box??? I think I have one or two of those Share this post Link to post Share on other sites
Poppa Phill 61 #10 Posted March 2, 2022 3 hours ago, RJ Hamner said: thanks Is that what I think it is on top the box??? I think I have one or two of those I got the 522xi with cab front end loader and new mower deck for $600 last year. axles were bad an hubs wallowed and busted. Im almost done with the rebuilding. I had an aneurysm couple years ago an I forget stuff sometimes while im doing it, makes life hard. That box is lft to right 18in, front to back 12 inches, bottom to top 21 & 3/4 inches. I went outside in the snow x2 to get this done, my memory aint werf a nickel.. God Blss Share this post Link to post Share on other sites
