2022 Big Show buy, sell and trade.

[elcamino/wheelhorse 9,297]

@squonk You trying to get gas money or are you taking out me and the flip flop kids to a real nice dinner Thursday night at the BS?

[squonk 41,050]

32 minutes ago, elcamino/wheelhorse said:

@squonk You trying to get gas money or are you taking out me and the flip flop kids to a real nice dinner Thursday night at the BS?

Figure I may need to bribe the staff at the BBQ to let us eat indoors! hehe

[squonk 41,050]

Bare short frame snow plow frame. Has been cut and welded but is back to original length. Includes angle handle. Works as it should.  $25

 

 

SOLD!!

Edited April 13, 2022 by squonk

[JoeM 7,871]

On 4/12/2022 at 10:34 AM, squonk said:

Bare short frame snow plow frame. Has been cut and welded but is back to original length. Includes angle handle. Works as it should.  $25

Mike I will take that frame.

 

[squonk 41,050]

32 minutes ago, JoeM said:

Mike I will take that frame.

 

Ok Joe! 

[buckrancher 2,679]

E141 in excellent condition used one season then was traded in for a gas tractor has three one year old now batteries and 36 volt charger $1000 

Edited May 12, 2022 by buckrancher

[Jennifer 1,877]

16 hours ago, buckrancher said:

E141 in excellent condition used one season then was traded in for a gas tractor has three one year old now batteries and 36 volt charger $1200 

Just curious!  Are these electric ones have implement hitch on back and able to perform the same as the others?  Multiple jobs and work or just mowing?  

[SylvanLakeWH 25,524]

11 hours ago, Jennifer said:

Just curious!  Are these electric ones have implement hitch on back and able to perform the same as the others?  Multiple jobs and work or just mowing?  

Its the same frame as a C Black Hood. I have one. You can plow snow etc. and has the standard WH draw hitch and has front and mid attach a matics. Can also put a two inch hitch on back…

[Sparky-(Admin) 21,314]

10 hours ago, SylvanLakeWH said:

Its the same frame as a C Black Hood. I have one. You can plow snow etc. and has the standard WH draw hitch and has front and mid attach a matics. Can also put a two inch hitch on back…

I know the one listed isnt yours…but how is the deck pictured on this one for sale powered/spun? 

[buckrancher 2,679]

49 minutes ago, Sparky said:

I know the one listed isnt yours…but how is the deck pictured on this one for sale powered/spun? 

electric motors

[squonk 41,050]

Same with the snow blower. And they are heavy!     (I had to help carry one up to a loft once! ) 

[Pullstart 62,828]

39 minutes ago, buckrancher said:

electric motors

@Sparky, @SylvanLakeWH told me that GE Elektrak models had motors on each spindle… but not WH?  I’d like to see the drive system too Brian 

[SylvanLakeWH 25,524]

19 minutes ago, Pullstart said:

@Sparky, @SylvanLakeWH told me that GE Elektrak models had motors on each spindle… but not WH?  I’d like to see the drive system too Brian 

My bad on that. I referenced the GE but did not describe correctly the WH version. I don’t have a deck but thought, incorrectly, that it was powered different…

 

Sorry. 

[Pullstart 62,828]

5 minutes ago, SylvanLakeWH said:

My bad on that. I referenced the GE but did not describe correctly the WH version. I don’t have a deck but thought, incorrectly, that it was powered different…

 

Sorry. 

I forgive you.  

[squonk 41,050]

Notice: The following listing are for Wheel Horse items that belong to a friend of mine who is in poor health. Trying to thin his collection. These WERE ALL RUNNING YEARS AGO but were packed away so you can guess they will NEED BATTERIES CARBS CLEANED ECT. He was sick for a very long time and these tractors have been SITTING FOR A FEW YEARS AT LEAST. I will describe them the best he can remember about them and what I saw. I can haul a couple of them to the show with  a 50% deposit. I am not going to bother digging them out unless there is a serious buyer:

 

C 160 Auto with 48" deck. He said engine ran good but smoked some. ENGINE TURNS BY HAND. Original seat has a few tears as do the armrests. Deck has been welded and HAS SOME OTHER HOLES  $425 C160 AND 48" DECK SOLD!!! 

 

 

 

 

 

 

C 120 Auto. Ran good. ENGINE TURNS BY HAND. Will need at least one rear tire. Will come with a 42" SD deck. ( NOT THE DECK PICTURED)  $425

 

 

 

Commando 8. ENGINE TURNS BY HAND. Original steering wheel not cracked. WILL NEED TIE RODS AND SEAT (missing) Frt. tires flat. May hold air. Comes with deck with deck.  $325

 

 

 

 

42"  Long frame snowplow. Repainted $150

 

 

 

 

 

 

 

 

 

 

 

Edited April 17, 2022 by squonk

[dkg520 509]

1990 520-8 with 669 hours. Runs excellent and everything works as it should. New seat and tires. Weights are not included in the price $1900.00 Call or text 804-678-8771. Thanks

[squonk 41,050]

Looking for 1 deep dish 8" frt wheel in good condition.

 

[JoeM 7,871]

On 4/25/2022 at 1:30 PM, squonk said:

deep dish 8" frt wheel

Mike I got this one, I would say fair condition. Not sure if your after something to work with or ready to go?

 

 

 

[squonk 41,050]

I'll keep it in mind Joe. Looking for one I don't have to sand blast if possible.

[RJ Hamner 1,007]

If I want more room, the wife tells me that I have to have a CLEARANCE SALE!  I Will be at the show on THURSDAY

So.........as I recall this is a 69/70 hood small bend in grill needs work  $20

 

Handyman special:  Off a 520.  If you know someone who does auto seats it needs the stuff to hold the fabric to the seat pan   $35

 

Brand New Floor Mats for a 520  $30SOLD

 

SNOOT for single stage snow blower - has repair on the tilt tab  $15

 

Rod and Flag for a single stage snowblower  $15

 

Spindles from 48" mower deck (68/69 I think)  $30 

 

42" Plow (blade only)  $40

 

10 amp Stator from 1970 12 HP  $10

 

Three items:  really ugly (but intact) battery tray, !! Sold.   Tool Box in primer (has repair on seat hinge) and Tool Box in red (pretty good shape) $5 each

 

I do have two C series Frames both have cracks in the trans mounting plate  (i'd have to fight my way in and out of the shed to get pictures)

If interested let me know $10 each

 

 

 

Edited May 2, 2022 by RJ Hamner
Sold

[c-series don 8,677]

I’ll buy the rod and flag for the blower. I’ll be at the show. I can PM you my phone number 

[wallfish 16,994]

7 hours ago, RJ Hamner said:

Three items:  really ugly (but intact) battery tray, Tool Box in primer (has repair on seat hinge) and Tool Box in red (pretty good shape) $5 each

Interested in the battery tray, Just let me know how you want to be paid

I'll be there Thu,Fri,Sat

[RJ Hamner 1,007]

31 minutes ago, c-series don said:

I’ll buy the rod and flag for the blower. I’ll be at the show. I can PM you my phone number 

Ok it’s yours  I know Verizon works at the show. Mine is 2406749895

[RJ Hamner 1,007]

21 minutes ago, wallfish said:

Interested in the battery tray, Just let me know how you want to be paid

I'll be there Thu,Fri,Sat

Cash would work. I should be there early Thurs. SOLD

Edited May 1, 2022 by RJ Hamner
Sold

[RJ Hamner 1,007]

42 minutes ago, c-series don said:

I’ll buy the rod and flag for the blower. I’ll be at the show. I can PM you my phone number 

I know Verizon works at the show. Mine is 2406749895. SOLD