867 Rehabilitation

[WHX?? 48,828]

6 hours ago, rjg854 said:

Dan, will this tractor get a $900 paint job. 

I don't think so Randy I suggested a matching 701 for the flame and he told me I was on crack 

 

4 hours ago, Pullstart said:

And Cinday actually joins him?  Poor lady.

 

4 hours ago, squonk said:

She's a Saint!   (  Translation: She doesn't dare take her eyes off of him since the Big Show!) 

Now listen here bozos .... I may have been a little gassy but she took the cake. I need to remind you there is no privy in an ice shack so when she has to have a bowel movement ... ain't exactly a bouquet of roses. You guys all got wives you know! I told her next time to get in the truck and head for the landing. 

[SylvanLakeWH 25,598]

[stevasaurus 22,764]

The real problem is...nobody is going to read 25 pages of junk to see how Dan did some of the things he does.  

   That is the problem with these large threads.  Lots of good information is lost in the junk and gone forever.  A thread like this is never going to get into the reference section.

[WHX?? 48,828]

26 minutes ago, stevasaurus said:

The real problem is...nobody is going to read 25 pages of junk to see how Dan did some of the things he does.  

   That is the problem with these large threads.  Lots of good information is lost in the junk and gone forever.  A thread like this is never going to get into the reference section.

Get no argument out of me on that Steve... hence the reveals. Is abit fun tho. 

Ok idea here fellas once all the BS has been dealt out have a mod go back and shovel poop aND delete..... if the member so desires of course. Just like the classifies. We get our jollies and rocks off and the forum gets an informational resto. 

Edited February 13, 2022 by WHX??

[stevasaurus 22,764]

Just sayin'.  Something to think about.    Jim that is never going to happen...going back and deleting posts.  Nevermind...I just feel sorry for Dan doing a serious resto (and he is not the only one lately).  

[WHX?? 48,828]

Indeed Dino... How he got that hitch pin is some good stuff. 

[rjg854 11,378]

11 minutes ago, stevasaurus said:

The real problem is...nobody is going to read 25 pages of junk to see how Dan did some of the things he does.  

   That is the problem with these large threads.  Lots of good information is lost in the junk and gone forever.  A thread like this is never going to get into the reference section.

Once it's over and done, can the thread be edited so all the baloney can be eliminated, to make it a more meaningful one?

[WHX?? 48,828]

15 hours ago, rjg854 said:

Once it's over and done, can the thread be edited so all the baloney can be eliminated, to make it a more meaningful one?

Didn't I just say that in post 29 Randy???  

Edited February 14, 2022 by WHX??

[stevasaurus 22,764]

@rjg854 Yes it could, but Karl does not like to delete things and besides, it is a pain in the butt to clean that much up.  It would be better for Dan to do his whole resto and then start his thread with all of his information.  I've done this a few times in my Transmission threads for this reason.

 

[rjg854 11,378]

Not sure Jim  . Probably got lost in all the gobbly-**** 

Edited February 13, 2022 by rjg854
Sp

[WHX?? 48,828]

15 minutes ago, stevasaurus said:

@rjg854 Yes it could, but Karl does not like to delete things and besides, it is a pain in the butt to clean that much up.  

 

Understood Steve I was going to start a thread in suggestions about this dilemma  but I think you just answered it. I will shut up now you tell me too Dan and pound the snot out out of the others if they dont either you wish! 

Guessing this doesn't apply to  of other 867's tho ????? 

[Sparky-(Admin) 21,326]

26 minutes ago, WHX?? said:

Guessing this doesn't apply to  of other 867's tho ????? 

 

 

Correct! Pics of 867’s keeps the thread on topic. Plus if Dan needs a close up pic or a measurement, those of us with intact machines can chime in. 

 

 

[ebinmaine 67,592]

🐻 here. 

[Snoopy11 5,714]

23 hours ago, Achto said:

Ain't that seat purty? 

 

 

 

Anthropomorphic beagle present.

 

 

That seat... sure isn't purty... but does look familiar. IT LOOKS IDENTICAL TO MY 800 SPECIAL SEAT. Rips and all...

 

That went bye-bye pretty quick-like.

 

Don

 

[Snoopy11 5,714]

I don't want to take up too much room in your thread, @Achto... but are you planning on doing a frame-off resto on this one?

 

Don

[Achto 27,601]

22 hours ago, kpinnc said:

If I put a laughy face reaction to that, does that prove just how old I am?

 

It just makes you a connoisseur of classic music, that's all. 

[Achto 27,601]

10 hours ago, rjg854 said:

Dan, will this tractor get a $900 paint job

 

Not this one. Stock factory legit & no other BS.  Well as close as I can get any way.

[Achto 27,601]

1 hour ago, Snoopy11 said:

I don't want to take up too much room in your thread, @Achto... but are you planning on doing a frame-off resto on this one?

 

Frame off plus a lot more.

[Snoopy11 5,714]

5 minutes ago, Achto said:

 

Frame off plus a lot more.

We will have to get Karl to make a poll so people can vote on our resto projects...

 

Don

[Achto 27,601]

Todays fun adventures. I ended up finding some kinda good news and some not so good news. I'll start with the good news. I cracked open the tranny to see how much damage the water had done.

 

Pleasantly surprised when I opened it up. As I suspected, I don't think the water has been in the transmission very long. 

 

The water did lead me to open it up though and I did find a couple of gears that I will want to replace.

 

Every thing has been degreased and is patiently waiting for some seals, a couple of bearing and a couple of gears.

 

The not so good. I pulled the head to de-carbon it and see what kind of shape the cylinder was in. Well with this amount of piston wash it would need a re-ring job at the very least.

 

Then I pulled the piston to find this nice little surprise inside of the cylinder. 

 

After taking measurements, here are the results that I came up with. The bore measures up well, less than .001" variance in the bore but the rough spot will have to be machined out. Will have to go at least .010" over to fix that issue. Measured the crank pin only to get more disappointments. The crank pin is .003" out of round. Sooo, that will have to be turned down to fit a .010 under sized rod.  I have the block stripped down and it is patiently waiting for parts and a trip to the machine shop.

 

 

A few disappointment's today but I won't let them get me down.  The build must go on.

Edited February 14, 2022 by Achto

[WHX?? 48,828]

Any idea what might have possessed somebody to do this?  I sure can't figure it out. 

[Achto 27,601]

1 minute ago, WHX?? said:

Any idea what might have possessed somebody to do this?

 

There was some sort of a hitch welded on there. I cut it off right after I got the tractor, had for got about the remnants until I took it apart. 

[ebinmaine 67,592]

Is it like that on the other side of the sheet metal on the other side of the tractor?

[TJ5208 1,824]

1 minute ago, Achto said:

 

There was some sort of a hitch welded on there. I cut it off right after I got the tractor, had for got about the remnants until I took it apart. 

Wow that's somewhere to put a hitch it may be quite effective but on That metal may not.

[Achto 27,601]

2 minutes ago, ebinmaine said:

Is it like that on the other side of the sheet metal on the other side of the tractor?

 

Yep, same stuff on the other side.