Pilgrimtim 2 #1 Posted February 12, 2022 I found a 269h Wheel Horse that wasn't running and bought it as a parts tractor but I got it running and it came with a snow thrower so I thought I'd see what it would take to get it operational. It has a transaxle leak leak and now I'm looking at replacing the axle seals but I right away came up with the problem that the seal (Toro 93-0451) isn't available and I'm wondering if anyone has found another seal somewhere that would work as a replacement or am I just out of luck? Thanks 1 Share this post Link to post Share on other sites
oldlineman 1,482 #2 Posted February 12, 2022 Just a little looking on the net and I believe it is Husqvarna part # 19215434270 ,with dimensions S 25.4 X 42 X 8 . Have not found a source , but you could contact a seal distributor with these dimensions and see what you come up with. The tranny should be a Tuff Torq K-61A according to what I have found. Maybe Garry will chime in, he knows everything about these things or knows where to find it. Bob 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,094 #4 Posted February 12, 2022 https://www.psep1.biz/arinet.asp#/s/TO//93-0451//1/ Share this post Link to post Share on other sites
Pilgrimtim 2 #5 Posted February 20, 2022 I don't know how long it took you to find that but thanks. I looked through screen after screen on the computer without any luck. Thanks again! 1 Share this post Link to post Share on other sites
Pilgrimtim 2 #6 Posted February 21, 2022 Well, I'm back.. I tried to order the part from psepl.com but they don't have any either. Does anyone know the dimensions of the seal that I need? Share this post Link to post Share on other sites
rmaynard 15,594 #7 Posted February 21, 2022 Did you check on the part that @oldlineman above mentioned? Share this post Link to post Share on other sites
oldlineman 1,482 #8 Posted February 21, 2022 https://www.ebay.com/itm/263023602998 I believe this should be the seal you need. Bob Share this post Link to post Share on other sites
peter lena 8,720 #9 Posted February 21, 2022 @Pilgrimtim maybe this Timken # will work , 473380, from one grampa to another , pete Share this post Link to post Share on other sites
pfrederi 17,866 #10 Posted February 21, 2022 I do not think the timken one will work if the OD is 42 mm as shown on the baggie for the tuff torque part Share this post Link to post Share on other sites
