WheelHorse520H 708 #1 Posted February 2, 2022 Hi, I have been dying to get a snowblower for my 1988 520 H or my 607 and was wondering if this one on FB is worth the price and will even fit either of my tractors. Especially after this past weekend’s storm I see a growing need to keep a snowblower handy. Let me know your thoughts. Is it okay to put up these photos? If not I’ll take them down ASAP. Thanks, Andrew Share this post Link to post Share on other sites
WHX?? 48,801 #2 Posted February 2, 2022 Photos not working for me guy .... fellas? 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #3 Posted February 2, 2022 1 minute ago, WHX?? said: Photos not working for me guy .... fellas? Once I logged on again they don’t work for me either, they might be too large. I usually have to make them smaller. Let’s try this again… 1 Share this post Link to post Share on other sites
roadapples 6,983 #4 Posted February 2, 2022 Price isn't bad if it's all there. Older one, can't see the handle to turn the chute Share this post Link to post Share on other sites
WheelHorse520H 708 #5 Posted February 2, 2022 (edited) 9 hours ago, roadapples said: Price isn't bad if it's all there. Older one, can't see the handle to turn the chute Neither can I, is that expensive? Would it fit either tractor? That’s kind of a deal breaker if it doesn’t fit anything I have. The only thing the description says is, “In operation go condition. NEED GONE!” Thanks for the help Edited February 2, 2022 by WheelHorse520H Share this post Link to post Share on other sites
peter lena 8,589 #6 Posted February 2, 2022 @WheelHorse520H does not have the chute rod / handle on it , might be in the area , that single stage blower is a 36x42 , with those " sided cutters " that are on it in place. another thing that looks good in picture is that the auger is not chewed up or bent . if you were to get this , obviousely a very thorough detailed inspection , from someone that is familiar with these blowers. should be up on a table bench so its total function is visible. probably needs a # 40 chain for the auger , its probably savable , you are looking at neglect and much needed service, I have the same model , that works , pete Share this post Link to post Share on other sites
pfrederi 17,685 #7 Posted February 2, 2022 Should fit the 520. Would have to come with a front tachmatic to work on 607 (way lacking in HP to be truly effective) Do not see the flag or lift rod. (circled) They are available but cost $$ Look for cracks at the front top corners of the housing 1 Share this post Link to post Share on other sites
Pullstart 62,812 #8 Posted February 2, 2022 13 hours ago, WheelHorse520H said: they might be too large. I usually have to make them smaller. Please consider becoming a supporting member. It will unlock unlimited photo sharing and preserve the site for more generations to come. We can usually all agree, this forum has saved us way more in repair labor than a membership might cost. We can also agree, this forum costs us more in addictions of tractor wrangling as well 2 1 Share this post Link to post Share on other sites
Jeff-C175 7,199 #9 Posted February 2, 2022 (edited) 3 hours ago, WheelHorse520H said: “In operation go condition. Presuming the seller meant "good condition", to that I say Horse Crap. It's missing parts and appears to need significant work. That thing hasn't been used in a decade or more. Edited February 2, 2022 by Jeff-C175 1 Share this post Link to post Share on other sites
WHX?? 48,801 #10 Posted February 2, 2022 Gotta side with Jeff on this one. I got two of them you could have for parts for free you were a supporter & local. 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #11 Posted February 2, 2022 38 minutes ago, Pullstart said: Please consider becoming a supporting member. It will unlock unlimited photo sharing and preserve the site for more generations to come. We can usually all agree, this forum has saved us way more in repair labor than a membership might cost. We can also agree, this forum costs us more in addictions of tractor wrangling as well Something I’ve considered for a while but haven’t thought about much. Maybe I will. Thanks for putting the bug in my ear again, I’d love to help out. So it sounds like it needs work, so that begs the question what would y’all pay for it? 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #12 Posted February 2, 2022 29 minutes ago, Jeff-C175 said: Presuming the seller meant "good condition", to that I say Horse Crap That’s what I typed but I’m sure you’ve encountered autocorrect. Share this post Link to post Share on other sites
Handy Don 12,174 #13 Posted February 2, 2022 Add a price greater than $10 to the cost/effort of acquiring the parts needed to fix/complete it. IMHO, that number would make buying a complete and working and known-to-fit your machine a better deal. Share this post Link to post Share on other sites
squonk 41,040 #14 Posted February 2, 2022 (edited) Even a good used one would probably need chain and sprockets. Save you $$$ and look for a complete one. Edited February 2, 2022 by squonk 1 Share this post Link to post Share on other sites
WHX?? 48,801 #15 Posted February 2, 2022 1 hour ago, WheelHorse520H said: I’m sure you’ve encountered autocorrect. All the time Sylvia.... Share this post Link to post Share on other sites
Jeff-C175 7,199 #16 Posted February 2, 2022 2 hours ago, WheelHorse520H said: what would y’all pay for it? I don't believe I would pay for it. Give the guy your number and tell him when he can't sell it, you'll haul it away for free. 2 Share this post Link to post Share on other sites
WheelHorse520H 708 #17 Posted February 2, 2022 1 hour ago, Jeff-C175 said: I don't believe I would pay for it. Give the guy your number and tell him when he can't sell it, you'll haul it away for free. Easy enough for me to do. I’m now glad I put this up before I bought it. Thanks again guys. Share this post Link to post Share on other sites
Jeff-C175 7,199 #18 Posted February 2, 2022 (edited) 1 hour ago, WheelHorse520H said: before I bought it But, on the other hand, IF you have the ablility to strip it all down and replace the bearings and such that are most likely worn out, AND you can find any and all missing parts... It MIGHT be worth... oh... 25-50 bucks? Maybe? I just rebuilt an old rusted hulk of one that was given to me. I think I spent maybe $150 in parts and paint. And a LOT of time stripping it down, welding up the cracks, and repainting it. You can find nice ones in the $300 range that don't need rebuilding. Edited February 2, 2022 by Jeff-C175 2 Share this post Link to post Share on other sites
briankd 817 #19 Posted February 2, 2022 i got one theses few years ago 20 bucks but was missing the flag . to rebuild it bearings chain and sprockets i haven't justified my time and money due to not needed for the amount of snow i get . could also buy one in decent shape for 300 bucks. Share this post Link to post Share on other sites
Jeff-C175 7,199 #20 Posted February 2, 2022 1 minute ago, briankd said: missing the flag I think they ALL are! or at least MOST of them! The one I got was missing, but the guy who gave it to me found it about a month or three later, YAY! (thanks Dennis!) Share this post Link to post Share on other sites
briankd 817 #21 Posted February 2, 2022 1 minute ago, Jeff-C175 said: think they ALL are! or at least MOST of them! i was going to make my own i have the pipe to do it but would need the measurements for the flag end mine needs new sprocket welded on the auger and missing the chain guards that wrap around the chain i was going to make them also but i lost interest in it and it sits outside behind my shed no room to put it inside now Share this post Link to post Share on other sites
Jeff-C175 7,199 #22 Posted February 2, 2022 5 minutes ago, briankd said: lost interest in it I've had that happen too many times! So many unfinished projects! Share this post Link to post Share on other sites
Snoopy11 5,714 #23 Posted February 2, 2022 (edited) 23 hours ago, WheelHorse520H said: Is it okay to put up these photos? OMG!!! I would ask Karl to kick you off the forum if you DIDN'T post photos!!! (not really) Bring us your tired, weary, broken, untamed, or even thoroughbred horses. Better yet, send us pictures!!! Don Edited February 2, 2022 by Snoopy11 Share this post Link to post Share on other sites
