Tight Shot Tuesday

[Lee1977 6,659]

!966

[Wheel-N-It 2,969]

12 hours ago, squonk said:

What's that Ferd? 

 

Mike, that's a 1965 Ford F-100. We named it " Ol Blue '. This trustworthy workhorse has been in the family for 26 years. It has a 240 cubic inch straight 6 engine, and a three speed transmission ( three on the tree ).

I hope you like my Ferd 

[Thegearhead0324 1,255]

Little late but… the 1257

Edited May 25, 2023 by Thegearhead0324
Oops.

[WHX?? 48,815]

1 hour ago, Wheel-N-It said:

 a three speed transmission ( three on the tree

Bet young wipper snappers dont have an idea what a three on a tree is. 

Hope to run one sometime again before I croak. 

Choice Van

What's that Cheap Trick song? 

She's nice she's tight  she's given me the go...

Edited May 25, 2023 by WHX??

[ebinmaine 67,486]

1 hour ago, Wheel-N-It said:

straight 6 engine

Best part 

[ohiofarmer 3,265]

Did this 520H push the Oliver Super 88 Diesel backward with just a snow blade.   Yeppir

   Doing a major organizing clean out. Of the 43x80 shop do the thundering herd gets nicely consolidated

[Wheel-N-It 2,969]

5 minutes ago, ohiofarmer said:

Did this 520H push the Oliver Super 88 Diesel backward with just a snow blade.   Yeppir

   Doing a major organizing clean out. Of the 43x80 shop do the thundering herd gets nicely consolidated

 

What size are the rafters in that pic?  They look like 4x6 . Is that because of the snow load there where you live?

[ohiofarmer 3,265]

7 hours ago, Wheel-N-It said:

 

What size are the rafters in that pic?  They look like 4x6 . Is that because of the snow load there where you live?

2x6x16. The main shop is about 31 feet by 80 and the width was regulated by the top chord of the truss being limited to sixteen feet. I built my own trusses back in the day to save money. The lean to was built at the same time and not an addition with thoughts that it would keep the shop area more in order. 

   Fellas, they are never big enough, but at least I am reducing the amount of stuff laying on the floor.. .

    There should be room for two columns  of Wheel Horses 32 feet long parked nose to tail by tomorrow.

 

 

[peter lena 8,625]

@TJ5208  very often refer to things in plane sight , you are at the perfect stage to save and retore your paint finishes . personally like an aerosol penetrating oil , on every painted / decal finished spot . lit it sit a day , wipe off with clean soft cloth , till dry , do it again . notice how on second rub down , the finish is darker ?  paint has a clean depth? at that point I  use a 6" llectric palm buffer , with a cleaner wax , it just keeps getting better , also like  303 brand vinyl  spray , for seat , tires . have brought back  some horses that started out like yours . not difficult , if you were closer , would show you . save you paint . pete

[peter lena 8,625]

@TJ5208  very often refer to things in plane sight , you are at the perfect stage to save and retore your paint finishes . personally like an aerosol penetrating oil , on every painted / decal finished spot . lit it sit a day , wipe off with clean soft cloth , till dry , do it again . notice how on second rub down , the finish is darker ?  paint has a clean depth? at that point I  use a 6" llectric palm buffer , with a cleaner wax , it just keeps getting better , also like  303 brand vinyl  spray , for seat , tires . have brought back  some horses that started out like yours . not difficult , if you were closer , would show you . save you paint . pete

[peter lena 8,625]

@TJ5208    like this , pete  , also note heim joint on plow lever rod  , no play , sloppyness , solid smooth / easy . pete

 

[Sparky-(Admin) 21,316]

Is this a “tight-shot”? 
  It’s my breakfast this morning that I ate off the hood of my tractor at a show  … needed a sturdy flat surface 

 

 

 

[SylvanLakeWH 25,557]

Yum!

 

[WHX?? 48,815]

OK it ain't Tuesday so sue me... @Achto says he gets sendimental  about this so who am to argue ... i know they leak Sqounky but get over it... 🤣

Edited May 28, 2023 by WHX??

[Achto 27,571]

7 minutes ago, WHX?? said:

@Achto says he gets sentamental  about this so who am to argue

 

if you look in the upper right hand corner, you'll see that my 953 will be running a sediment bulb too. Just like it would have had from the factory. 

 

Edited May 28, 2023 by Achto

[Wheel-N-It 2,969]

3 minutes ago, WHX?? said:

OK it ain't Tuesday so sue me... @Achto says he gets sendimental  about this so who am to argue ... i know they leak Sqounky but get over it... 🤣

 

 

No complaints on the fuel bowl from me. I enjoy looking at it. They are not the only thing that gets a little leaky with age, but us guys have to love em' anyway. 

[SylvanLakeWH 25,557]

[SylvanLakeWH 25,557]

17 hours ago, WHX?? said:

OK it ain't Tuesday so sue me... @Achto says he gets sendimental  about this so who am to argue ... i know they leak Sqounky but get over it... 🤣

 

16 hours ago, Achto said:

my 953 will be running a sediment bulb too.

 

Sumpthing special about them bulbs... 

 

Might say they are trappingly beautiful... 

[19richie66 17,506]

They look nice when fuel of liquid. 

[WHX?? 48,815]

40 minutes ago, 19richie66 said:

They look nice when fuel of liquid. 

Soon grasshopper soon...

[D_Mac 8,618]

23 hours ago, Sparky said:

Is this a “tight-shot”? 
  It’s my breakfast this morning that I ate off the hood of my tractor at a show  … needed a sturdy flat surface 

 

 

 

Pancakes, sausage,  and patina....mmmmmmmm

[SylvanLakeWH 25,557]

5 hours ago, 19richie66 said:

They look nice when full of liquid. 

 

4 hours ago, WHX?? said:

Soon grasshopper soon...

 

[Sparky-(Admin) 21,316]

B-80 8speed … 

 

[Pullstart 62,858]

Polished up Frank a bit today.  

[ebinmaine 67,486]

Have a closeup of some shift linkage.