Dave 1953 70 #1 Posted January 21, 2022 I have some damage on my right fender and I have found a local guy that has done sheet metal work for me before to do the work but I have to pull it off. I have very poor eyesight and it would be very helpful if I knew beforehand how many bolts I have to remove to get it off. Does anyone that has removed a GT14 fender know appx. how many there are. Thanks in advance. Share this post Link to post Share on other sites
WHX?? 49,490 #2 Posted January 22, 2022 GT14 still on the bucket list and the fellas say i need to grow up some more before they let me have one. @19richie66 ??? @Aldon you still lurking? Help Dave out? 1 Share this post Link to post Share on other sites
pfrederi 18,004 #3 Posted January 22, 2022 interesting parts manual indicates 17 between 2 fenders.. if it warms up I may go down to the barn and look at mine... (warm up may be awhile) 1 Share this post Link to post Share on other sites
953 nut 56,187 #4 Posted January 22, 2022 Looking at the IPL (Illustrated Parts List) it appears that there are about 14 bolts for each fender and the tail light wiring. Some are a bit of a PITA to get back in so don't tighten any of them until all are started. 1 Share this post Link to post Share on other sites
Dave 1953 70 #5 Posted January 22, 2022 22 minutes ago, pfrederi said: interesting parts manual indicates 17 between 2 fenders.. if it warms up I may go down to the barn and look at mine... (warm up may be awhile) I figured 6 or 8. Some previous owner had chains on it and they tore up the vertical part on the rear. He will have to cut the damaged part out and weld a new piece in. When he gets done you will never know it has been repaired. I'm starting on a long journey and there will be more questions but thanks to all who responded. 2 Share this post Link to post Share on other sites
19richie66 17,532 #6 Posted January 22, 2022 I can check tomorrow. Share this post Link to post Share on other sites
Lee1977 6,874 #7 Posted January 22, 2022 1 hour ago, 19richie66 said: I can check tomorrow. Richie are you getting ice or snow? 1 Share this post Link to post Share on other sites
19richie66 17,532 #8 Posted January 22, 2022 7 hours ago, Lee1977 said: Richie are you getting ice or snow? Little bit of both. Share this post Link to post Share on other sites
Pullstart 63,205 #9 Posted January 22, 2022 12 hours ago, Dave 1953 said: I figured 6 or 8. Some previous owner had chains on it and they tore up the vertical part on the rear. He will have to cut the damaged part out and weld a new piece in. When he gets done you will never know it has been repaired. I'm starting on a long journey and there will be more questions but thanks to all who responded. If you could show pictures of your damaged pieces… I have quite a bit of spare GT14 stuff. I might be able to get you replacement pieces that require no rework - just clean and paint. Share this post Link to post Share on other sites
19richie66 17,532 #10 Posted January 22, 2022 Seven Share this post Link to post Share on other sites
Dave 1953 70 #11 Posted January 27, 2022 On 1/21/2022 at 6:47 PM, Dave 1953 said: I have some damage on my right fender and I have found a local guy that has done sheet metal work for me before to do the work but I have to pull it off. I have very poor eyesight and it would be very helpful if I knew beforehand how many bolts I have to remove to get it off. Does anyone that has removed a GT14 fender know appx. how many there are. Thanks in advance. My grandson came yesterday and had to remove a total of 6 bolts to get the top portion of the fend off that was damaged. Now if I can just get him back over to install he 4 new hydraulic hoses on it so I can crank it! Share this post Link to post Share on other sites
