Chaz54 57 #1 Posted January 19, 2022 I’ve been searching and can’t find what I know is on these forums somewhere. I’m looking for a poly replacement edge for a 48” snow plow Share this post Link to post Share on other sites
peter lena 8,588 #2 Posted January 19, 2022 @Chaz54 have a motorcycle shop near by ? do they sell " quads " ? if they do they probably have those poly blades in stock , worth a look , pete 1 Share this post Link to post Share on other sites
DET 105 #3 Posted January 19, 2022 I bought mine off of Amazon, works fine. Share this post Link to post Share on other sites
Pullstart 62,809 #4 Posted January 19, 2022 As @SylvanLakeWH has figured out, don’t cheap out for PVC. It doesn’t work. 1 1 Share this post Link to post Share on other sites
Pullstart 62,809 #5 Posted January 19, 2022 I have meant to check this joint out for a couple years now. This is just the next town over. https://www.cuttingedgepoly.com 1 Share this post Link to post Share on other sites
8ntruck 6,991 #6 Posted January 19, 2022 (edited) Check McMaster Carr for suitably sized bars of UHMW. UHMW - ultra high molecular weight plastic - is a whole lot tougher than poly. It is low friction and scuff resistant. Edited January 19, 2022 by 8ntruck 2 Share this post Link to post Share on other sites
roadapples 6,983 #7 Posted January 19, 2022 Seen them on ebay... Share this post Link to post Share on other sites
Jeff-C175 7,199 #8 Posted January 19, 2022 I'm gonna try some plastic when my rubber one wears out, but I'm happy with it so far: https://www.rubbercal.com/specialty-products/snowplow-blades/ Share this post Link to post Share on other sites
pfrederi 17,681 #9 Posted January 19, 2022 I have been using this wears well 3 Share this post Link to post Share on other sites
grinchsr 626 #10 Posted January 20, 2022 I have been using the UHMW on my blade for 3 winters now. You can't wear that stuff out and it keeps the driveway happy. 2 Share this post Link to post Share on other sites
