Just another parts pile build

[Oldskool 6,644]

I made a trade with @ebinmaine a while back for a pile of parts. That is where most of the parts came from to build Hiram.

 

There is still alot of random parts left.

It's a shame for them to just sit around.

 

So here goes another parts pile build.

 

This is what I have freed from the ice so far.

 

 

 

.

[Oldskool 6,644]

Not looking to bad so far.

Short frame, long frame hood and a bit of 312-8 thrown in.

[ebinmaine 67,593]

VERY cool. 

I'm extremely happy I got that pile o stuff to YOU. 

I figured you would put it to some good use. 

 

Looking forward to seeing how this one progresses and turns out.  

 

[Oldskool 6,644]

38 minutes ago, ebinmaine said:

Looking forward to seeing how this one progresses and turns out.  

Me too. I was thinking of using the 10hp I got from ya but with all the room under the hood Im not so sure now.

 

Getting it all to roll and steer is a wonderful thing

[ebinmaine 67,593]

Do you have other power plant potentials there other than single cylinders?

 

[rjg854 11,378]

That's what's so amazing about  you can take different parts from different years and still come up with a unique 

[Pullstart 62,905]

Nice bag-o-bolts!

[sjoemie himself 3,068]

1 hour ago, Oldskool said:

Not looking to bad so far.

Short frame, long frame hood and a bit of 312-8 thrown in.

 

Gotta say that looks pretty good. Kinda reminds me of some of the big wheatland tractors.

[SylvanLakeWH 25,598]

 

Looking good!

[kpinnc 12,083]

1 hour ago, rjg854 said:

That's what's so amazing about  you can take different parts from different years and still come up with a unique

 

Every. Tractor. I. Own.

 

ALL of them! 

[ebinmaine 67,593]

6 minutes ago, kpinnc said:

 

Every. Tractor. I. Own.

 

ALL of them! 

Not to jump all over Mike's thread already... Do you have threads on all yo' stuff?

[Oldskool 6,644]

1 hour ago, ebinmaine said:

Do you have other power plant potentials there other than single cylinders?

 

No.....I wish I did

[Oldskool 6,644]

I forgot I had 2 of these.

This may just stay in there.

Unless something else comes along.

[ebinmaine 67,593]

Just now, Oldskool said:

....I wish I did

Boy. You need you a weirdo engine....

[ebinmaine 67,593]

Just now, Oldskool said:

This

Have you had that/those running?

[kpinnc 12,083]

Just now, Oldskool said:

forgot I had 2 of these.

 

I like it! 

[kpinnc 12,083]

6 minutes ago, ebinmaine said:

Not to jump all over Mike's thread already... Do you have threads on all yo' stuff?

 

Only the ones that were "projects". And most are scattered back 10 years or more. Not much to it.

[Oldskool 6,644]

21 minutes ago, ebinmaine said:

Have you had that/those running?

The one you are looking at I have had running on a remote tank a few months ago.

[kpinnc 12,083]

Mag 14 is quite stout linked to a manual tranny. It'll be a beast!

Edited January 18, 2022 by kpinnc

[Oldskool 6,644]

36 minutes ago, ebinmaine said:

Boy. You need you a weirdo engine....

LMAO I read that to quick and thought you said I was a weirdo 🤣😂.  I was going to say yup. 🤣

 

Ya something out of the ordinary would be cool.

[Oldskool 6,644]

12 minutes ago, kpinnc said:

Mag 14 is quite stout linked to a manual tranny. It'll be a beast!

Heck maybe I should stretch it and run both 🤔🤔😆😅🤣

[ebinmaine 67,593]

30 minutes ago, Oldskool said:

Heck maybe I should stretch it and run both 🤔🤔😆😅🤣

Seriously. I'd had that thought too.  

[Oldskool 6,644]

Could anyone tell me if a cylinder like this can be easily shortened? I'm thinking by cutting the cylinder sleeve and the outer end of the piston shaft. Then shorten and retread the 4 bolts.

[ebinmaine 67,593]

2 minutes ago, Oldskool said:

cylinder

My inclination would be to call Lowell at Wheelhorse Parts and More. 

He rebuilds our Horse's cylinders so may have the knowledge.....?

 

[Oldskool 6,644]

I can't imagine I couldn't. Maybe it's not as straight forward as it seems, but seems simple enough.

I have one I would like to shorten by about 4in.