wallfish 17,011 #1 Posted January 17, 2022 (edited) So.... The wet heavy snow we had took it's toll on the 520-H PTO today and apparently the clutch plate must have been slipping and overheated because it blew apart. Needless to say I need to find a replacement. Update- Found a NOS plate on the epay. I'll find some material an re-line the old one too Edited January 17, 2022 by wallfish 2 Share this post Link to post Share on other sites
pfrederi 17,741 #2 Posted January 17, 2022 Newer stuff uses 6-3/4 Inch like yours Old (charger/ raider with the side mounted PTO lever use 6") 1 Share this post Link to post Share on other sites
squonk 41,150 #3 Posted January 17, 2022 When the blower goes on the PTO pulley comes off for an inspection. My rule of thumb. (And yes Pete I grease the inner brg with Lucas) 1 2 Share this post Link to post Share on other sites
stevasaurus 22,764 #4 Posted January 17, 2022 John, I can't believe you are not pushing snow with that Wheel Horse motor bike. 1 Share this post Link to post Share on other sites
RED-Z06 2,221 #5 Posted January 17, 2022 Sucks when you pull the handle back and stuff hits your right foot... Share this post Link to post Share on other sites
