Jeff-C175 7,203 #26 Posted January 11, 2022 (edited) 26 minutes ago, Jrain said: I coat the entire bolt and pack the Hex head with Mylanta, 26 minutes ago, Jrain said: good coating of A aluminum oxide and B zinc I've never heard of this before, and thought I had heard everything... I don't see any evidence of Zinc in the ingredients. Aluminum (but not OXIDE, rather HYDROXIDE) and Magnesium, yes, but no Zinc If you want Zinc, you're probably better off with a cold galvanize spray before assembly. Edited January 11, 2022 by Jeff-C175 Share this post Link to post Share on other sites
Jrain 276 #27 Posted January 11, 2022 29 minutes ago, Jeff-C175 said: I've never heard of this before, and thought I had heard everything... I don't see any evidence of Zinc in the ingredients. Aluminum (but not OXIDE, rather HYDROXIDE) and Magnesium, yes, but no Zinc If you want Zinc, you're probably better off with a cold galvanize spray before assembly. Mylanta Tonight has the zinc , the grey Anti Seize has the galvo properties like cold galvo its just gets every where though good stuff but a mess to use , 1 Share this post Link to post Share on other sites
kpinnc 12,395 #28 Posted January 11, 2022 2 hours ago, Jrain said: Mylanta will give you a very good coating of A aluminum oxide and B zinc witch is the main ingredient in Mylanta and gives some of the best protection as far as threaded coating go and you thought it was only for heartburn I learned something today! Mission accomplished. I'm off until tomorrow! 1 Share this post Link to post Share on other sites
Jeff-C175 7,203 #29 Posted January 11, 2022 (edited) 2 hours ago, Jrain said: Mylanta Tonight has the zinc There's no evidence of that. Doesn't seem to have the Aluminum Hydroxide either but does have Calcium Carbonate. I think I'll just stick with regular Anti-Sieze instead of Anti-Acid, thank you! Edited January 11, 2022 by Jeff-C175 Share this post Link to post Share on other sites
kpinnc 12,395 #30 Posted January 11, 2022 28 minutes ago, Jeff-C175 said: I think I'll just stick with regular Anti-Sieze instead of Anti-Acid, thank you! I use anti-sieze everywhere that doesn't call for a dry torque. Whoever invented it is right up there with whoever invented the cordless drill in my world. There should be a Nobel "made life easier" prize... 2 Share this post Link to post Share on other sites
pfrederi 17,866 #31 Posted January 11, 2022 6 minutes ago, kpinnc said: I use anti-sieze everywhere that doesn't call for a dry torque. Whoever invented it is right up there with whoever invented the cordless drill in my world. There should be a Nobel "made life easier" prize... Didn't make cleanup any easier. One small dab of anti-sieze can spread all over you, your hands, tools and workshop.... 1 2 Share this post Link to post Share on other sites
Wheelhorse#1 1,698 #32 Posted January 11, 2022 (edited) 33 minutes ago, pfrederi said: Didn't make cleanup any easier. One small dab of anti-sieze can spread all over you, your hands, tools and workshop.... I know,no matter how carefully you brush it on.it’s almost magical how it gets everything all anti sneezed. I love the stuff.Just have lots of rags around. Edited January 11, 2022 by Wheelhorse#1 4 Share this post Link to post Share on other sites
WHX?? 49,153 #33 Posted January 12, 2022 1 hour ago, pfrederi said: One small dab of anti-sieze can spread all over you, your hands, tools and workshop.... Ever tell you guys about the time @Achto put antisieze all over The Hosen's @Pullstart plow carry handle..... Man I wished we had pics! 2 1 Share this post Link to post Share on other sites
Jeff-C175 7,203 #34 Posted January 12, 2022 I use the antisieze 'lip balm' No muss, no fuss, no bother. 2 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,922 #35 Posted January 12, 2022 3 minutes ago, WHX?? said: Ever tell you guys about the time @Achto put antisieze all over The Hosen's @Pullstart plow carry handle..... Man I wished we had pics! Keep hearing tales, tall…tall… tails… but as the say: No pics no happen… 3 Share this post Link to post Share on other sites
Snoopy11 5,714 #36 Posted January 12, 2022 8 minutes ago, SylvanLakeWH said: No pics no happen Don 1 Share this post Link to post Share on other sites
ebinmaine 68,294 #37 Posted January 12, 2022 1 hour ago, pfrederi said: Didn't make cleanup any easier. One small dab of anti-sieze can spread all over you, your hands, tools and workshop.... And your neighbor's. And your uncle's. And your neighbor's uncles. Etc..... Fun stuff. 1 Share this post Link to post Share on other sites
Pullstart 63,091 #38 Posted January 12, 2022 On 1/10/2022 at 11:01 AM, pfrederi said: Only reason they are square is so jam nut can fit over them pit might be mentioned already, but why couldn’t someone thread the nut on before installing the screw? One added step on the assembly line? 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #39 Posted January 12, 2022 (edited) 4 minutes ago, Pullstart said: pit might be mentioned already, but why couldn’t someone thread the nut on before installing the screw? One added step on the assembly line? Lack of common sense... Wait... what... did I just type that? Sorry... lost my filter there for a second... Don Edited January 12, 2022 by Snoopy11 1 Share this post Link to post Share on other sites
Achto 27,751 #40 Posted January 12, 2022 (edited) 45 minutes ago, SylvanLakeWH said: No pics no happen… I'd like to go with this statement. But Jim keeps bringing it up so that Kevin don't forget. Kevin's day of retaliation will come I'm sure, It's all good though, I can take as well as give. If I remember correctly Ryan's son ended up wearing most of it. Edited January 12, 2022 by Achto 1 1 2 Share this post Link to post Share on other sites
ebinmaine 68,294 #41 Posted January 12, 2022 48 minutes ago, Pullstart said: why couldn’t someone thread the nut on before installing the screw? That's the way I ALWAYS install them. It's a pita to get my meat fingers in beside the hub flange so I thread the nut on the set screw, then use the socket with an extension to hold the screw and my hand can be up away from the area. 2 1 Share this post Link to post Share on other sites
kpinnc 12,395 #42 Posted January 12, 2022 1 hour ago, Jeff-C175 said: I use the antisieze 'lip balm' No muss, no fuss, no bother. I'd leave that thing in a pants pocket, and it would end up in the dryer... Wife would shoot me. 4 Share this post Link to post Share on other sites
ebinmaine 68,294 #43 Posted January 12, 2022 23 minutes ago, kpinnc said: I'd leave that thing in a pants pocket, and it would end up in the dryer... Wife would shoot me. Ya but the dryer would NEVER rust. 3 Share this post Link to post Share on other sites
Jeff-C175 7,203 #44 Posted January 12, 2022 1 hour ago, kpinnc said: I'd leave that thing in a pants pocket, and it would end up in the dryer... Wife would shoot me. OMG... that would make one HELLUVA mess! Although, it's much bigger than a lip balm tube, it's about an inch or so in diameter. Kinda hard to miss. Sorta like the proverbial 'roll of quarters' in your pocket! Share this post Link to post Share on other sites
kpinnc 12,395 #45 Posted January 12, 2022 Just now, Jeff-C175 said: Sorta like the proverbial 'roll of quarters' in your pocket! Oh lawd no! Happy to see ya, and yes that's a roll of anti-sieze in my pocket... 3 Share this post Link to post Share on other sites
WHX?? 49,153 #46 Posted January 12, 2022 12 hours ago, Jeff-C175 said: I use the antisieze 'lip balm' Put some on Jeff and go give Squonky a big mooch! 3 Share this post Link to post Share on other sites
peter lena 8,720 #47 Posted January 12, 2022 @Pullstart agree with you on the added nut first , thats an obvious step up on that lock down , another thing is that using a 6 pt box wrench , on the flat horizontal pull , is the strength you want , mechanical advantage. also 8 pt sockets , work on those 4 pt , bolts . agree with the anti seize . when you are dealing with a long setting thread area , using a BOTTOM TAP AND PENETRATING OIL , will clean out rust and finish threading. if you are not cleaning out the thread bore , you could be piling up rust / scale preventing bolt from doing its job, don't ask me how I know this .pete 2 Share this post Link to post Share on other sites
Jrain 276 #48 Posted January 12, 2022 16 hours ago, Jeff-C175 said: There's no evidence of that. Doesn't seem to have the Aluminum Hydroxide either but does have Calcium Carbonate. I think I'll just stick with regular Anti-Sieze instead of Anti-Acid, thank you! I really do not care whats in that bottle , all I know it works like a champ , I I got it a long time ago from an old time race engine builder when I use to street race and track race back in the 70s its never failed me, Share this post Link to post Share on other sites
Jeff-C175 7,203 #49 Posted January 12, 2022 2 hours ago, Jrain said: really do not care whats in that bottle , all I know it works like a champ Sure, I understand, I'm just correcting your mis-statement that it contains Zinc because it doesn't. You are of course free to do what pleases you! Share this post Link to post Share on other sites
Jrain 276 #50 Posted January 13, 2022 On 1/12/2022 at 11:42 AM, Jeff-C175 said: Sure, I understand, I'm just correcting your mis-statement that it contains Zinc because it doesn't. You are of course free to do what pleases you! thanks for your correction ,just going by what I was told 40 years ago . I apologize for the misinformation thank you again 1 1 Share this post Link to post Share on other sites
