Lane Ranger 10,947 #1 Posted December 26, 2021 This part in this pile is New Old Stock and listed as # 3350. I have never seen one before. Portion with two holes welded in center of top part that goes in slot hitch with a hole for a pin. Any ideas or anyone have one they use?? 1 Share this post Link to post Share on other sites
kpinnc 11,934 #2 Posted December 26, 2021 Looks like a plow adapter for a Brinly moldboard to work with a WH slot hitch. 5 1 Share this post Link to post Share on other sites
Wheelhorse616 4 #3 Posted December 26, 2021 Anyone own a 312-8 recently restored mine and on the starter, I have power to the positive side of it and it won’t turn over unless I put a wrench across the two terminals. Thanks. Share this post Link to post Share on other sites
Achto 27,512 #4 Posted December 26, 2021 47 minutes ago, Wheelhorse616 said: Anyone own a 312-8 recently restored mine and on the starter, I have power to the positive side of it and it won’t turn over unless I put a wrench across the two terminals. Thanks. May I suggest starting a post in the electrical section? You will get an answer faster. https://www.wheelhorseforum.com/forum/65-wheel-horse-electrical/ Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,035 #5 Posted December 26, 2021 Item 19 in the manual for AC-7 cultivator 1 2 Share this post Link to post Share on other sites
kpinnc 11,934 #6 Posted December 27, 2021 45 minutes ago, gwest_ca said: Item 19 in the manual for AC-7 cultivator Well, I was close. In the pic, it looks to have a slight angle like a plow has. Nice work on that! 1 Share this post Link to post Share on other sites
Wheelhorse616 4 #7 Posted December 27, 2021 4 hours ago, Achto said: May I suggest starting a post in the electrical section? You will get an answer faster. https://www.wheelhorseforum.com/forum/65-wheel-horse-electrical/ Thank you! Share this post Link to post Share on other sites
.thumb.JPG.1b2a1a39cdcedb1e001571713350b32c.JPG)