Dave 1953 70 #1 Posted December 24, 2021 I hope everyone has a very nice Christmas and a good new year. I recently purchased a GT14 and the tiller for it with the 3 point that is set up for a tiller. Having very poor eyesight it took me a while to discover that my 3 point hitch is not exactly like one that is not set up for the tiller. The seller has no more pieces to it so who knows where the original parts wound up but I would like to buy the missing parts (don't laugh too loud) or I can fabricate the parts if I have some pics and measurements of the missing parts. I have the parts manual for it but I'm not sure if the 3 point parts are shown in it or not. Could someone please send me a list and the part numbers of the parts I need. Naturally buying them would be easier but I know they are hart to come by, maybe as hard as the NOS Goodyear 27 X 8.50-15 tire that I bought yesterday. If someone would be willing to help out an 68 year old man who is just getting into restoring one and could PM me with the info I need I would be eternally grateful. This is not my first WH, I have had a 502 and a D250 but neither of them needed anything. Merry Christmas. Dave Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,035 #2 Posted December 25, 2021 Share this post Link to post Share on other sites
953 nut 55,116 #3 Posted December 25, 2021 If you remove the parts outlined in blue and make a couple of links like the solid blue rectangle using 5/8-18 threaded ball joints and some 5/8-18 threaded rod you should be OK. 1 Share this post Link to post Share on other sites
Dave 1953 70 #4 Posted December 25, 2021 Thank you guys for this info. It looks like this may be easier than first thought. You guys are the best. Merry Christmas. 1 Share this post Link to post Share on other sites
peter lena 8,588 #5 Posted December 25, 2021 @dave1953 , merry Christmas ! agree with @953 nut on the HEIM end fittings , they are all over the net , in price and design type , have a number of them on my horses , in constant movement areas , no failures . I use , 2 , 1/2" HEIMS on the lower dozer blade swing arm , to the bottom of the steering quadrant , its so solid and smooth , its just right . also on clutch linkage , steering arms , pto lever end , tried them out to see how they stand up , years now , no failures , have a good one, pete 1 Share this post Link to post Share on other sites
