ebinmaine 67,596 #51 Posted December 26, 2021 2 minutes ago, Wheelhorse616 said: black ground wire. Wheelhorse uses a LOT of black wires that are NOT ground. Do you have a schematic diagram for your tractor? You'll really need to trace down the wires by the diagram. Share this post Link to post Share on other sites
Handy Don 12,235 #52 Posted December 27, 2021 29 minutes ago, Wheelhorse616 said: I have this extra ground wire that I am not sure where it goes then, headlights are grounded, solenoid but it is a foot long black ground wire. You are expecting help, but not helping yourself. Did you answer the questions you were asked? No. Have you posted pictures? No. Have you searched for and downloaded the manual for your tractor, including the schematic? I don't know, as you haven't answered or made it clear. Yet you expect someone to diagnose and solve your problem. Folks here are very kind and helpful and willing to share knowledge but they cannot read minds or see your tractor unless you do your part. 1 Share this post Link to post Share on other sites
953 nut 55,306 #53 Posted December 27, 2021 1 hour ago, Wheelhorse616 said: everything wired correctly besides the ground for it, a picture of your solenoid would be great be great, it’s a new solenoid but just issues with grounding for it. If you could post a picture, I responded to one of your other posts with a picture showing what to ground. Share this post Link to post Share on other sites
RED-Z06 2,221 #54 Posted December 27, 2021 1 hour ago, Wheelhorse616 said: I have this extra ground wire that I am not sure where it goes then, headlights are grounded, solenoid but it is a foot long black ground wire. Where does it go to on the other end? Share this post Link to post Share on other sites
Wheelhorse616 4 #55 Posted December 27, 2021 48 minutes ago, RED-Z06 said: Where does it go to on the other end? This is the wire I am talking about, I am not sure where it goes, if anyone knows with a picture would be great. Thanks. Share this post Link to post Share on other sites
953 nut 55,306 #56 Posted December 27, 2021 10 hours ago, Wheelhorse616 said: I am not sure where it goes, You already have two other posts going on. Please don't keep hitchhiking on other unrelated posts. 1 1 Share this post Link to post Share on other sites
RED-Z06 2,221 #57 Posted December 27, 2021 11 hours ago, Wheelhorse616 said: This is the wire I am talking about, I am not sure where it goes, if anyone knows with a picture would be great. Thanks. Goes between the hood and block to ground the hood. Share this post Link to post Share on other sites
sparkie333 265 #58 Posted December 27, 2021 7 hours ago, RED-Z06 said: Goes between the hood and block to ground the hood. Great job there--I didn't think you would get such a good tractor from this load you brough home---I could see the deck was dead rot---If that deck is like my deck the center pully is a 2 fur---otherwise it is a stacked pully and when I bought my new pulley 10 or so years ago It cost me about 80 bucks-- Looks like it is doing a great job moving that dirt. -Good luck 1 Share this post Link to post Share on other sites