The Gman 476 #1 Posted December 12, 2021 Ok fellow trans guys I've got most of the inners cleaner than when I split the housing. Now it's parts time. I researched some past post and gathered that the 1533 axel bearings are like hens teeth to find but thought I'd ask anyway for sources. If it turns out there're like fairy dust I do have a plan B. Also looking for the shift forks, both, one was broken and I broke the other one. The needle bearings are actually in decent shape. All the packed/dried gear oil preserved them quite well. So, 1533 bearings and shift forks would make my day. 1 Share this post Link to post Share on other sites
wallfish 17,011 #2 Posted December 13, 2021 1533 bearings were NLA until Lowell stepped up to the plate https://wheelhorsepartsandmore.com/?s=1533&post_type=product&dgwt_wcas=1 2 4 Share this post Link to post Share on other sites
wallfish 17,011 #3 Posted December 13, 2021 (edited) Not sure why it double posted Edited December 13, 2021 by wallfish 1 Share this post Link to post Share on other sites
WHX?? 48,828 #4 Posted December 13, 2021 See Lowell at Wheel Horse Parts and more he'll have all the bearings seals fer sure. He may even have the shift forks. https://wheelhorsepartsandmore.com/parts.html 1 Share this post Link to post Share on other sites
WHX?? 48,828 #5 Posted December 13, 2021 47 minutes ago, wallfish said: Not sure why it double posted Cause yer cross eyed?!?! 3 Share this post Link to post Share on other sites
stevasaurus 22,764 #6 Posted December 13, 2021 If Lowell does not have shift forks, A -Z Tractors in our vendor section should be able to help. Those transmissions are bullet proof and all parts are available. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #7 Posted December 15, 2021 On 12/13/2021 at 12:48 PM, stevasaurus said: If Lowell does not have shift forks, A -Z Tractors in our vendor section should be able to help. Those transmissions are bullet proof and all parts are available. I was going to mention you here Steve... sooner or later... Don Share this post Link to post Share on other sites
