Snoopy11 5,714 #51 Posted December 13, 2021 @RED-Z06 Don 1 Share this post Link to post Share on other sites
RED-Z06 2,221 #52 Posted December 13, 2021 46 minutes ago, Snoopy11 said: My Tillotson that I sold made 25. Don I never liked that carb...it was the one regret i had, i should have built a megasquirt EFI system or used a bigger flatslide off a bike. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #53 Posted December 14, 2021 21 hours ago, RED-Z06 said: I never liked that carb...it was the one regret i had, i should have built a megasquirt EFI system or used a bigger flatslide off a bike. I never thought about a megasquirt. However, I have a gravity system on HellHorse, so I really haven't ever had an issue. I like not having a fuel pump... one less thing to go bad... Don Share this post Link to post Share on other sites
peter lena 8,639 #54 Posted December 14, 2021 @Snoopy11 without starting a war , been using https://www.amazon.com/Rislone-4405-Supplement-Concentrate-Treatment/dp/B0075559UY/ref=a81214&psc=1 , in my small engines , go on site, look up back of bottle for applications , significant engine ease of operation improvement. use this with rotella 30 wt , castrol oil over winter , think its a very good engine cleaner too. oils last longer , and run without effort. lots of hours on all my engines now , just my own experience, that amazon price is very good , for me it includes free shipping , pete 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #55 Posted December 14, 2021 6 hours ago, peter lena said: @Snoopy11 without starting a war , been using https://www.amazon.com/Rislone-4405-Supplement-Concentrate-Treatment/dp/B0075559UY/ref=a81214&psc=1 , in my small engines , go on site, look up back of bottle for applications , significant engine ease of operation improvement. use this with rotella 30 wt , castrol oil over winter , think its a very good engine cleaner too. oils last longer , and run without effort. lots of hours on all my engines now , just my own experience, that amazon price is very good , for me it includes free shipping , pete Yes sir. I use the Lucas ZDDP additive. It is a must for my high horsepower and high rpm engines. I try to use Mobil-1 oil which has some ZDDP in it, as well as Royal Purple Racing formula, which has high ZDDP additives. I don't think oil conversations should necessarily mean "war" ...I really like exchanging ideas. Here is what I use! https://www.amazon.com/Lucas-Oil-LUC10063-Ounce-Engine/dp/B001DKN8ZU/ref=sr_1_2?keywords=lucas+zinc&qid=1639511890&s=automotive&sr=1-2 Don Share this post Link to post Share on other sites
peter lena 8,639 #56 Posted December 14, 2021 @Snoopy11 I like swapping ideas too, another lucas lube, have to check it out , thanks pete 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #57 Posted December 14, 2021 3 minutes ago, peter lena said: @Snoopy11 I like swapping ideas too, another lucas lube, have to check it out , thanks pete I have to use the Lucas ZDDP formula in my crate engine in my truck. I began using it then, and have used it in every racing engine I have built so far. I find no cam lobe or follower wear with this additive. I also believe that it helps with rod journal wear... but I think ZDDP is mostly to help stop cam lobe and follower wear. Don 1 Share this post Link to post Share on other sites
peter lena 8,639 #58 Posted December 14, 2021 @Snoopy11 , yes since using it in all my small engines , they have taken on an ease of running that they just simply did not have before , my stand by generator with a 3600 rpm run range , just cruises along , definitely easier and smoother than before. combine that ease of run with a 2 spring pull on your throttle cable arm , one spring assists speed up the other slow down , makes the cable work much easier . pete Share this post Link to post Share on other sites
slim67 2,735 #59 Posted December 16, 2021 After my last post on page 2, you guys lost me. I’m pretty good on engines but yeah, you lost me. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #60 Posted December 16, 2021 (edited) 8 minutes ago, slim67 said: After my last post on page 2, you guys lost me. I’m pretty good on engines but yeah, you lost me. Hopefully, we did not hijack your thread... Now... I am going to go slither back under my rock... Don Edited December 16, 2021 by Snoopy11 1 Share this post Link to post Share on other sites
pfrederi 17,741 #61 Posted December 16, 2021 8 minutes ago, slim67 said: After my last post on page 2, you guys lost me. I’m pretty good on engines but yeah, you lost me. I think they lost most of us.... Share this post Link to post Share on other sites
Snoopy11 5,714 #62 Posted December 16, 2021 Just now, pfrederi said: I think they lost most of us.... I... even lost myself... Don Share this post Link to post Share on other sites
slim67 2,735 #63 Posted December 16, 2021 8 minutes ago, Snoopy11 said: Hopefully, we did not hijack your thread... Now... I am going to go slither back under my rock... Don No worries on my end. I was waiting for you two to start talking about the metallurgy processes in connecting rods next😀. I am impressed what can be done with a single cylinder engine. Now I know who to ask for performance advice. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #64 Posted December 16, 2021 5 minutes ago, slim67 said: Now I know who to ask for performance advice. That's for sure! I think, between @RED-Z06 and I, we could keep talking performance all day and night... Don 1 Share this post Link to post Share on other sites
RED-Z06 2,221 #65 Posted December 16, 2021 9 minutes ago, slim67 said: No worries on my end. I was waiting for you two to start talking about the metallurgy processes in connecting rods next😀. I am impressed what can be done with a single cylinder engine. Now I know who to ask for performance advice. Billet is heavy but its stronger, powdered metal is also quite strong but...can you trust the process? Bearing inserts should be standard on small engines. 1 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #66 Posted December 16, 2021 25 minutes ago, RED-Z06 said: Billet is heavy but its stronger, powdered metal is also quite strong but...can you trust the process? Bearing inserts should be standard on small engines. If I take a cast rod, hit it with a hammer, I could break it. If I take a billet rod, hit it with a hammer, I MIGHT be able to bend it slightly... but it won't break. Don Share this post Link to post Share on other sites
Snoopy11 5,714 #67 Posted December 16, 2021 27 minutes ago, RED-Z06 said: Bearing inserts should be standard on small engines. You on da money there. Those babbit bearing inserts are worth every penny! Don Share this post Link to post Share on other sites
RED-Z06 2,221 #68 Posted December 16, 2021 17 minutes ago, Snoopy11 said: If I take a cast rod, hit it with a hammer, I could break it. If I take a billet rod, hit it with a hammer, I MIGHT be able to bend it slightly... but it won't break. Don Yeah but they'll both bend if you give em the kill tune or blow a head gasket and suck in waterm 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #69 Posted December 16, 2021 3 minutes ago, RED-Z06 said: Yeah but they'll both bend if you give em the kill tune or blow a head gasket and suck in waterm Wow, I have never seen a cast rod bend. I have to admit, that is very interesting to me. I am going to have to think about that one. Maybe due to super-heating of the rod...? Don Share this post Link to post Share on other sites
Howie 886 #70 Posted December 16, 2021 Don't think those are cast rods. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #71 Posted December 16, 2021 3 minutes ago, Howie said: Don't think those are cast rods. The top one in the pictures sure isn't. I did think the same thing about the bottom rod in the pictures... but my eyes could be playing tricks... I'll put it this way, that bottom rod in the pictures does not mimic cast rods that I have replaced/removed. Don Share this post Link to post Share on other sites
Howie 886 #72 Posted December 16, 2021 Friend of mine has an engine shop builds a lot of circle track engines. Have seen quite a few laying around looking like that. Have seen some like the bottom one but can't recall who makes them though. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #73 Posted December 16, 2021 (edited) 18 minutes ago, Howie said: Friend of mine has an engine shop builds a lot of circle track engines. Have seen quite a few laying around looking like that. Have seen some like the bottom one but can't recall who makes them though. That photo is from: https://forums.nasioc.com/forums/showthread.php?t=2835423 Scroll down to post #8. It is an steel turbo H-beam rod. Don Edited December 16, 2021 by Snoopy11 typo Share this post Link to post Share on other sites
Snoopy11 5,714 #74 Posted December 16, 2021 More research... both rods are 4340 steel H-beam. The bottom photo's difference is just a photo mirage. Those are used in automotive supercharging and turbo engines. Not available for small engine use. Back to basics... cast rods break. Billet aluminum bends... just not "easily" ...but won't break. Don Share this post Link to post Share on other sites
Howie 886 #75 Posted December 16, 2021 He uses a lot of Callies rods that look a lot like that. 1 Share this post Link to post Share on other sites
