Pullstart 62,905 #1 Posted November 26, 2021 I love this air shroud on a K241 I’ve got. Post up pictures, if you have PO repairs that were so wrong they were right! 8 1 Share this post Link to post Share on other sites
Maxwell-8 4,277 #2 Posted November 26, 2021 bad fan shroud fix 5 Share this post Link to post Share on other sites
ohiofarmer 3,276 #3 Posted November 27, 2021 (edited) On 11/26/2021 at 11:17 AM, Maxwell-8 said: bad fan shroud fix I think you need to watch Andrew Camarata fix his truck. I either saw him use a sawzall or a chain saw on the inside....He is the sheet metal screw king. I have some 14HP black hood shaker mount engines that look horrible from my welds and added metal on the inside, but not too shabby on the outside. JB Weld is my friend Edited November 27, 2021 by ohiofarmer 1 Share this post Link to post Share on other sites
Maxwell-8 4,277 #4 Posted November 27, 2021 2 minutes ago, ohiofarmer said: On 11/26/2021 at 12:17 PM, Maxwell-8 said: I think you need to watch Andrew Camarata fix his truck. I either saw him use a sawzall or a chain saw on the inside....He is the sheet metal screw king. hahaha I think I saw that video haha. the dude is hilarious without him even knowing it. He needed to cut trough the dashboard for the heater core I think. Fired up his chainsaw cutting his way trough. Share this post Link to post Share on other sites
953 nut 55,298 #5 Posted November 27, 2021 I guess the handclapped grab bars on the rear fenders of "Hot Wheels" would qualify here. They were on the 953 when I bought it and I just couldn't see any reason to remove them. 2 3 Share this post Link to post Share on other sites
Lee1977 6,665 #6 Posted November 27, 2021 (edited) 1 hour ago, 953 nut said: I guess the handclapped grab bars on the rear fenders of "Hot Wheels" would qualify here. They were on the 953 when I bought it and I just couldn't see any reason to remove them. That's fender reinforcing. The fenders on that model are usually all bent in, those are nice and straight. Edited November 27, 2021 by Lee1977 Share this post Link to post Share on other sites
Pullstart 62,905 #7 Posted November 28, 2021 Big Junky is being taken apart. It’s a 1076 that has so many PO “fixes” that it’s hard to fathom how deep the repairs go! There’s not a ton on the tractor that is decent, but it ran and drove quite well. The hydro motor will go towards another hydro without reverse. The engine will get tossed on the shelf for now, but likely on a plow tractor some day. pardon the mud, it was a little wet the last time this one ran! Share this post Link to post Share on other sites
kpinnc 12,085 #8 Posted November 30, 2021 One day I'm gonna restore my 701, but the PO drilled out the hood. But, they did such a good job that it will likely stay... 1 2 Share this post Link to post Share on other sites
rjg854 11,378 #9 Posted November 30, 2021 It does look like a good job 1 Share this post Link to post Share on other sites
