NOS Wheelhorse rear weights

[JCM 9,130]

In 1989 when I bought my 312-8 one of the options I wanted was a set of rear WH weights. I remember coming home from work and driving in the driveway to see a new beautiful Wh tractor that was delivered with the wrong weights. Long story short I settled for a pair I did not want but use them to this day on the 400 series workers in the Winter. Last month I ended up , finally after 32 years with the OEM weights I always wanted. A big THANK YOU to one of our best members from CT  who you all know that also delivered them to Maine with no delivery charge. The weights are way to nice to use but you may see them at some point on Side Shot Saturday & Sunday on the 312-8 where they belong and then back on the shelf to save them for the next RS member to enjoy them.         Buddy.

[ebinmaine 67,317]

Niiiiiiice

[WHX?? 48,800]

Really ... every time you see them they are all scarred up. 

[AMC RULES 37,130]

Nice, NOS!

The only way I would even want a set of them.

[Snoopy11 5,714]

DANG those are nice! 

 

Don

[midpack 862]

I have a set like those. Too pretty to put to use! 

[WHX?? 48,800]

2 hours ago, AMC RULES said:

Nice, NOS!

The only way I would even want a set of them.

Now Madge I think I already called dibs! 

[AMC RULES 37,130]

 Oh geeze, where are my manners?

I would never stand in the way of an old lady and her dream.  

[WHX?? 48,800]

Good answer Madge....

[Inspectorjoe 471]

Very nice! It's good to hear that they'll be preserved.

I recently sold a pair. I couldn't bring myself to use them, I don't have and likely never will have a show tractor, so I let them go to someone else.

[76c12091520h 3,608]

 I always appreciate preserving those nos parts, but don't be afraid to use 'em , they're still available.

[JCM 9,130]

Brian, do you know the proper size and length for the hardware to fit an 89   312-8 by chance for those weights ?

[76c12091520h 3,608]

1 minute ago, JCM said:

Brian, do you know the proper size and length for the hardware to fit an 89   312-8 by chance for those weights ?

I will measure them tomorrow! 

[JCM 9,130]

Thank you Sir.  

[WHX?? 48,800]

12 " I'm thinkin Plunge. I have been known to just cut some 1/2" all thread tho. Leave a little extra on the outside to thread some pike nuts on. 

Just in case you gotta play chariots of fire with the neighbor on the JD... 

[AMC RULES 37,130]

 She would know, been a piker from way back.  

[76c12091520h 3,608]

22 hours ago, JCM said:

Brian, do you know the proper size and length for the hardware to fit an 89   312-8 by chance for those weights ?

The bolts measure 1/2" x 9"

[Sparky-(Admin) 21,312]

On 11/16/2021 at 3:58 PM, JCM said:

A big THANK YOU to one of our best members from CT  who you all know that also delivered them to Maine with no delivery charge.       Buddy.

 

@JCM Your very welcome! 

[76c12091520h 3,608]

Per my customers' request : Please install new rear weights on this tractor before purchase. I guess they won't be new for long.

[Handy Don 12,171]

Are you sure these are the right chains? It seems way too short--like it is sized for narrower or smaller diameter tires so the locking arm could go through the end link and then hook back as its supposed to.

[AMC RULES 37,130]

    

[WHX?? 48,800]

Yep those chains don't look quite right... like Madge a little short... 

[AMC RULES 37,130]

That's it!

I'm done with you.

[76c12091520h 3,608]

Agreed, chains don't fit right, had no time to fight with them tonight. They are marked as the matching size for these tires. Tomorrow....

[76c12091520h 3,608]

On 11/30/2021 at 8:43 PM, AMC RULES said:

    

I think this is better