Puller to remove the wheel hubs

[Raider12 13]

In the past I have seen several postings asking the best way to remove the pain in butt hubs from the axles on our Wheel Horses. Here is a picture (I hope) of the puller I made several years ago to do this job. I used the screw from a Mac harmonic balance puller as the driver and custom made the rest out a nice piece of scrap. Just throwing this out there for anyone needing to make thier own.

Denver

[d180man 5]

Hi nice job ! got to make one of them! :ychain:

[can whlvr 993]

good idea,nice and simple usually works the best..

[chamjack 0]

Good thinking. Looks like that would take care of hub removal in a hurry :thumbs2:

[pfrederi 17,866]

Nice idea

I can't weld so I made a puller from an old hub with bad keyways, a one inch bolt I had and some long 3/8" bolts. I suppose I could have used some 7/16 NF bolts to tread right in to the hub to be pulled but, A: (didn't have any) and B: if the hub to be pulled has bad threads...