Jump to content
Jim Turner

32" Snow Thrower for an 867.

Recommended Posts

Jim Turner

Curious if anyone has a 32" snow thrower that will fit an 867 located near Lafayette IN? I was looking on youtube for 32" snow throwers in operation. I only found Lane Rangers video. Assuming his lawn ranger still has the 5 HP on it. It does a pretty good job. Thinking an 8 HP may throw it even further if i applied the right size pulley. I would not want to go bigger than a 32" with the 8 HP.

Share this post


Link to post
Share on other sites
 
stevasaurus

Jim, you are looking for an ST32?...last number is the year and a few of them will work.  I suggest putting a want ad in the Classified Section / Want.  One of our vendors may also have one.

 

  • Like 1

Share this post


Link to post
Share on other sites
 
ri702bill

Jim:

I picked up a NOS never used 32 inch for my 854 a couple of years ago- works well - used it last winter - BUT...

It is a 1963 model - before I used it I added a second fixed idler sprocket and a longer chain to give more wrap on the welded-on auger sprocket (original had only 3 to 4 teeth of engagement and would wear excessively) Also replaces the non floating pulley shaft bearings with new 3 piece floating bearings 9 the sheet metal housing flexes a bit in use. Also added the lift flag assist spring mechanism.

Bill

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...