Pullstart 62,851 #126 Posted April 14, 2022 Hey Sylvia. Is the E series the same physical footprint as a blackhood C? 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #127 Posted April 14, 2022 Yes. Only difference is the hood is fiberglass, wraps lower on sides and is taller and the seat pan sits higher to accommodate two batteries where the gas tank would be. Here’s some comparison pics: 3 3 1 Share this post Link to post Share on other sites
ebinmaine 67,484 #128 Posted April 14, 2022 7 hours ago, SylvanLakeWH said: accommodate ... batteries Holds ((6??)) Total? 4 under hood, 2 under seat? I know you're using 3..... 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #129 Posted April 14, 2022 Yes standard is 6. Two banks of three wired in series then connected in parallel. I’m running three in series. 36 volt. Two under seat and one under hood. But… now there’s 4 batteries…! Big progress today. New (3) batteries installed. Train horn hooked up. Using best of old batteries dedicated to the horn and eventual lighting for the train… working on adding the battery monitors… IMG_1458.MOV 2 4 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #130 Posted April 15, 2022 Battery monitors are in! Work great! Love being able to check status at push of button… 2 4 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #131 Posted April 15, 2022 (edited) Added dedicated tender for the horn / lights / accessories battery. Edited April 15, 2022 by SylvanLakeWH 2 Share this post Link to post Share on other sites
c-series don 8,707 #132 Posted April 17, 2022 @SylvanLakeWHI’m just glad one of those E-Series tractors is back in service! And I or should I say we because I pretty sure I speak for us on RS are super happy to see that tractor getting ready for use as the locomotive! 3 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #133 Posted April 17, 2022 6 hours ago, c-series don said: @SylvanLakeWHI’m just glad one of those E-Series tractors is back in service! And I or should I say we because I pretty sure I speak for us on RS are super happy to see that tractor getting ready for use as the locomotive! Thanks! But I do give most credit to Erv Troyer who got it going for Dave Mercer the previous owner. See post 14. He and Dave were very helpful early on with history and direction… I’ve been blessed to be putting the finishing touches on their great efforts… 4 Share this post Link to post Share on other sites
Pullstart 62,851 #134 Posted April 18, 2022 SLWHSRRLocomotive #4! 1 2 Share this post Link to post Share on other sites
Maxwell-8 4,275 #135 Posted April 19, 2022 Any idea how many KW the electric motor is? 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #136 Posted April 19, 2022 2 hours ago, Maxwell-8 said: Any idea how many KW the electric motor is? Nope. I have read elsewhere that it supposedly was equal to a 14 hp engine but I don’t know if that is accurate. I don’t recall where I read it… No details in the owners manual I have… 2 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #137 Posted April 19, 2022 2 hours ago, SylvanLakeWH said: Nope. I have read elsewhere that it supposedly was equal to a 14 hp engine but I don’t know if that is accurate. I don’t recall where I read it… No details in the owners manual I have… 14hp is around 10.5KW. Then it must go trough a lot of battery? Your battery's are 80AH, at 12v each so 80 AH*36V for the three= 2880 watts for an hour or 2.88KWH that means you will have 3.9hp available for a complete hour. which I think is pretty good. Or at full power, I think you will have 16 minutes. That being said, pulling the train wouldn't require full power probably less then half. PS. I may be completely wrong with my calculation here, just thinking out loud. 2 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #138 Posted April 19, 2022 Beats me… I’m not an electric guy… I have not run it with full train but it will be in first or second gear and everything rolls pretty easy on paved flat roads… I ran it for half hour in third gear pulling one trailer with four kids and it didn’t even flinch… I now have the battery monitors and will be testing full train with weight as soon as it stops snowing!!! Should tell me how much juice it uses…I really only need 1/2 hour run times for what I do with it… so I am confident my needs will be met… 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #139 Posted April 23, 2022 (edited) Perfect puller… Very pleased with its train duties!!! Boxes are for weight… Edited April 23, 2022 by SylvanLakeWH 1 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #140 Posted April 30, 2022 Finishing touches from @Vinylguy… 4 2 Share this post Link to post Share on other sites
ebinmaine 67,484 #141 Posted May 1, 2022 Excellent usage of space for the added decals. Very impressive work on all changes. 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #142 Posted May 31, 2022 Pulled the train with 8 kids today in the local Memorial Day Parade. The E 141 worked like a charm. I am pleased.. ! 1 7 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #143 Posted June 10, 2022 On 5/31/2022 at 2:09 AM, SylvanLakeWH said: the train with 8 kids today And no more mandatory Earmuffs I see 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #144 Posted June 12, 2022 New seat today from A to Z tractor… 3 Share this post Link to post Share on other sites
Maxwell-8 4,275 #145 Posted June 12, 2022 22 minutes ago, SylvanLakeWH said: New seat today from A to Z tractor… Looks nice and comfy! Can't stand a duck tape seat myself. big upgrade. 1 1 Share this post Link to post Share on other sites
uglyblue66 112 #146 Posted June 16, 2022 NICE, glad to see 1 working. 1 Share this post Link to post Share on other sites
Pullstart 62,851 #147 Posted June 16, 2022 21 minutes ago, uglyblue66 said: NICE, glad to see 1 working. pretty soon you’ll see another one cruising. Toot toot! 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #148 Posted June 16, 2022 3 minutes ago, Pullstart said: pretty soon you’ll see another one cruising. Toot toot! Hhhmmm… Maybe I’ll breed them… Oops… Sorry for the visuals… 1 3 Share this post Link to post Share on other sites
Pullstart 62,851 #149 Posted June 16, 2022 15 minutes ago, SylvanLakeWH said: Hhhmmm… Maybe I’ll breed them… Oops… Sorry for the visuals… little electric babies taking over the east side lawns… like Edward Scissor Hands gone Turbo! 1 3 Share this post Link to post Share on other sites
953 nut 55,223 #150 Posted June 17, 2022 If the silent treatment with no engine sounds gets to be too much I think I have a solution https://www.ebay.com/itm/303808628843?chn=ps&mkevt=1&mkcid=28 4 Share this post Link to post Share on other sites