New to Me E-141

[WHX?? 48,815]

34 minutes ago, Wheel Horse 3D said:

I think the frosted like Craig's looks best.

I thought the frosted might block too much light. Havta ask @jeremi3210 now I sold the tractor to him and sent the lens with it.  

Edited November 5, 2021 by WHX??

[SylvanLakeWH 25,552]

Mama ain’t letting’ me take the youngsters for night rides…

 

it’ll look better not seeing the bulbs I think… 

[WHX?? 48,815]

12 minutes ago, SylvanLakeWH said:

Mama ain’t letting’ me take the youngsters for night rides…

Tell mama she has to go on nite "love" rides then..... 

[cschannuth 3,816]

5 hours ago, WHX?? said:

Hey Craig how'd you get my loader back? I was  just workin it last nite! 

Unfortunately, for me, it’s just a good memory. I hope you’re still having fun with it.

[cschannuth 3,816]

41 minutes ago, SylvanLakeWH said:

Mama ain’t letting’ me take the youngsters for night rides…

 

it’ll look better not seeing the bulbs I think… 

That’s what I thought too when I chose the frosted over the clear. The original lenses or sort of in between I think. They have some texture on the inside that sort of blocks the view of the bulb and I think the frosted sort of mimics that.

[pfrederi 17,738]

On 11/2/2021 at 9:52 PM, Handy Don said:

Ye

Yep. You can get 12, 24, or 36. Your choice. Its just like tapping transformer windings to get different outputs.

 

 

For a very limited load that will work.  however a bigger load will unbalance the batteries.  Example military vehicles run 24v  People tap one battery to run 12v accessorizes.  Limited to a phone charger or other low draw OK but bigger draw and you start having issues the batteries do not charge up evenly...

[SylvanLakeWH 25,552]

So don’t check the batteries with the 9v tongue trick…?

 

Got it.

 

I’m gonna need to bone up on this battery voltage amp DC balance draw stuff… 

[SylvanLakeWH 25,552]

Lights work! 

 

Not going to blind you, but they do the job… 

 

 

[Erv Troyer 16]

3 hours ago, SylvanLakeWH said:

Lights work! 

 

Not going to blind you, but they do the job… 

 

Yes, I know - I fixed them. Put in new bulbs all around. I had to shorten the hood support rope to keep the connectors from  pulling apart. The older rope on that bar is the original one, and probably could be used again. The front bulbs are 1156 tail light bulbs. You can get LED bulbs now to fit those sockets.

 

 

 

 

[Wheel Horse 3D 3,795]

On 11/5/2021 at 2:46 PM, SylvanLakeWH said:

I’d like to order one. All black with frosted lens. Couldn’t figure out which one that would be from your Etsy menu choices… I use satin black Rustoleum…

 

Pm me and give me the details…

Message sent Sylvie!

[WHX?? 48,815]

Thanks 3D ... I kinda boned Sylvia and told him I had the set  you sold me at the BS but I did let it go with the tractor I sold. 

On 11/5/2021 at 3:10 PM, SylvanLakeWH said:

 

 

I’m gonna need to bone up on this battery voltage amp DC balance draw stuff… 

Hang with us Sylvia between Squonky and I we know enough to be dangerous! 

[Pullstart 62,846]

A little accessorizing and you’ll have an E-rod!

 

 

[SylvanLakeWH 25,552]

Went with material on hand and made new cover for headlights… bottom of a broken Rubbermaid tub…

 

 

Edited November 7, 2021 by SylvanLakeWH

[WHX?? 48,815]

Nessecsity is the mother of invention Silvia .... want me to light a fire under 3Ds rear end??? 

[SylvanLakeWH 25,552]

Nope! 3D has great stuff. He’s been in contact!!! I’m just going cheap for now until I figure out what all is needed…

[WHX?? 48,815]

15 minutes ago, SylvanLakeWH said:

Nope! 3D has great stuff. 

Agreed but I'd still light that fire just to keep him in line! 

[WHX?? 48,815]

On 11/5/2021 at 2:32 PM, cschannuth said:

I hope you’re still having fun with it.

You kidding me I don't know how I got along with out it for making firewood! My back sure likes it! 

I did get it dirty tho..... 

[cschannuth 3,816]

4 minutes ago, WHX?? said:

You kidding me I don't know how I got along with out it for making firewood! My back sure likes it! 

I did get it dirty tho..... 

I forgive you for getting it dirty. I’m glad you are enjoying it.

[SylvanLakeWH 25,552]

Took advantage of warm day and put coat of black on the hood. Also made the headlight cover look right with black separation… 

 

 

 

 

Edited November 10, 2021 by SylvanLakeWH

[Maxwell-8 4,275]

That black hood, looks quite a bit beefier then an gas-powered black hood.

coming along nicely!

[SylvanLakeWH 25,552]

4 hours ago, Maxwell-8 said:

That black hood, looks quite a bit beefier then an gas-powered black hood.

coming along nicely!

 

Thanks!

 

It’s actually fiberglass and is slightly taller, wider and the sides come down a bit more compared to regular metal Black Hoods…

 

I think the design is intended to keep more snow/rain out due to the electronics, batteries etc…

[SylvanLakeWH 25,552]

More done today…

 

Seat pan is now solid and works great! Created a “sandwich”

of PVC board above and below the seat pan. Very rigid now…

 

Fabricated a guard for the exposed wires on clutch side of the motor. I think there must have been something there new, but long gone…used the other half of the belt guard I used for the drive belt fab…

 

 

 

 

Edited November 11, 2021 by SylvanLakeWH
Added pic of installed wire guard…

[Pullstart 62,846]

39 minutes ago, SylvanLakeWH said:

clutch side of the motor

reminded me of a poster in the shop…

 

 

[SylvanLakeWH 25,552]

New tie rods in the mail tonight!!! Thanks Lowell - Wheelhorsepartsandmore!!!

 

 

Both the E 141 and the C 105 are gonna get replacements… the E 141 has that lazy eye thing going on with the fronts going their separate ways… 🤪

 

 

[SylvanLakeWH 25,552]

Tie rods installed…

No more wandering front end…!