JCM 9,191 #51 Posted November 1, 2021 I myself have been waiting patiently for you to take ownership of a 420 for years. Not knowing you personally but all of your equipment and vehicles are top notch. I don't think I have seen one that clean and shiny, great job on the detail. I wish you luck with your new piece of WH history. I hope you will consider a trip to the 2022 Meet & Greet in N.Berwick Maine so we may all drool over it. A few questions if you don't mind. Did you get a 48'' SD deck with matching wheels ? Also all the other associated items, cover, key tag, leather pouch etc etc. ENJOY it and don't forget to drive it once and a while 2 Share this post Link to post Share on other sites
Brockport Bill 1,668 #52 Posted November 1, 2021 34 minutes ago, c-series don said: I purchased my lift table from Harbor Freight, it’s a motorcycle lift table that I made a wider top for out of two sheets of 3/4” plywood. I cut it down to something like 42”X72” then banded it with poplar to hide and protect the end grain of the plywood. Funny thing was when I went to purchase the plywood 3/4” CDX was $82.00 a sheet, I was shocked!! I then turned around in the same isle and saw 3/4” furniture grade oak plywood for $60.00. One sheet was slightly damaged in the corner so I got it for $50.00! I painted it and got a nice big Wheel Horse decal for the center. Still have to make a proper ramp to get the tractor on and off the table. Oh and had to extend the foot pedal because of the wider top by simply welding a piece of 4”x 3/4” box tubing to it. great info -- thanks -- i noticed the top so thats why i wondered if it was custom? I have seen You Tubes of WH tractor useage that are actually mcy lifts but those lifts had wing accessories to widen - good to know you simply did a custom widening -- I'll check out the HF site for info 1 Share this post Link to post Share on other sites
Brockport Bill 1,668 #54 Posted November 1, 2021 is this it? $549 Share this post Link to post Share on other sites
c-series don 8,728 #55 Posted November 2, 2021 @JCM Thank you for your kind words, as far as the blade deck goes no I didn’t get one with it. However I did get everything else, the cover, key tag, leather pouch and all the paper work that could possibly come with it, even the original hang tags. I’d love to come up to Maine next year, might have to bring these three along with the LSE! 3 2 Share this post Link to post Share on other sites
c-series don 8,728 #56 Posted November 2, 2021 (edited) 27 minutes ago, Brockport Bill said: is this it? $549 Yes that’s it I waited till it was on sale. Edited November 2, 2021 by c-series don 1 Share this post Link to post Share on other sites
WHX?? 48,833 #57 Posted November 2, 2021 Did you really have to flash that planter Don!?!?? Little here but Mike @prondzy made some show table extentions for his HF table out of repurposed bleacher seats to fit horses on. 2 Share this post Link to post Share on other sites
WHX?? 48,833 #58 Posted November 2, 2021 (edited) 2 hours ago, JCM said: Not knowing you personally but all of your equipment and vehicles are top notch. You ever quit coming up with nanby panby excuses not to make it to the BS Plunge you would see his fine collection. You in a hospital bed EB and I is gonna come wheel yer butt out, stuff you in a trailer and make sure you get ther! I think this was the year Don was telling Madge @AMC RULESto stuff his offer for a tractor and Denny @dclarke had to step in??? .. Edited November 2, 2021 by WHX?? 5 Share this post Link to post Share on other sites
EB-80/8inPA 1,655 #59 Posted November 2, 2021 18 minutes ago, WHX?? said: You in a hospital bed EB and I is gonna come wheel yer butt out, stuff you in a trailer and make sure you get ther! What am I missing here? You’ll need help stuffing that bear @ebinmaine into the trailer as well to get him down ther. 2 Share this post Link to post Share on other sites
WHX?? 48,833 #60 Posted November 2, 2021 (edited) Long story short @EB-80/8inPA the Plunge had plans to go BS, even had a date nite planned with the missus, but got side tracked by an ailment. I sent him a couple of little blue pills and he was cured..... ain't that right Plunge.... Sorry to disapoint you EB -80 but that pic is olddd.... EB want to make the trip these days we would just to tie down him to the roof of the cab... he would enjoy it more anyway! Edited November 2, 2021 by WHX?? 1 1 Share this post Link to post Share on other sites
WHX?? 48,833 #61 Posted November 2, 2021 Back on topic here Don what is your thoughts/plans for preserving her? 2 Share this post Link to post Share on other sites
EB-80/8inPA 1,655 #62 Posted November 2, 2021 19 minutes ago, WHX?? said: Sorry to disapoint you EB -80 but that pic is olddd.... Well I couldn’t delete the danged pic thing, and I have this ongoing time warp problem around here anyway. But if you do get him down here, I’ll make him some real coffee. (Don’t tell him I said that, though!) All is well! 1 2 Share this post Link to post Share on other sites
c-series don 8,728 #63 Posted November 3, 2021 23 hours ago, WHX?? said: Back on topic here Don what is your thoughts/plans for preserving her? @whx my plans as of right now are to keep her for ever,I’m not a buy and flip guy. I’m blessed to have the proper place to keep her where she’ll remain in her pristine state. I’m not in this to make money with this purchase, on the contrary I had to scramble money for months to make this happen. I’m just unbelievably happy that I actually own this beautiful piece of Wheel Horse history and God willing I’ll be able to bring it to the big show in June. I truly look forward to seeing so many of you guys . 3 2 3 Share this post Link to post Share on other sites
AMC RULES 37,132 #64 Posted November 3, 2021 Here's hoping you do. We're looking forward to riding that tractor! 3 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,331 #65 Posted November 3, 2021 5 minutes ago, AMC RULES said: Here's hoping you do. We're looking forward to riding that tractor! I will bring mine and we can have a pull off🤭. That would not go over well on many levels… 4 Share this post Link to post Share on other sites
Retired Wrencher 5,467 #66 Posted November 3, 2021 Don I am a little to the party but not to late to say WOW. I hope you enjoy it on sunny warm days cruising around the house or where ever. 2 Share this post Link to post Share on other sites
c-series don 8,728 #67 Posted November 6, 2021 I woke up this morning wondering if there are any other LSE’s out there that are signed by Cecil Pond? Does anyone know if there is? 1 Share this post Link to post Share on other sites
