Kohler Filter Breather

[oliver2-44 9,764]

Has anyone found a substitute for the mesh breather material Kohler sells?

I need several, and on several sites and they were around $12  found them on evilbay for $6

I don't want to hurt an engine with small plastic pieces separating and  floating around.  

But then again I've removed a few Kohler one that were falling apart when removed.

 

Thanks for any suggestions,

 

[stevasaurus 22,765]

Check these out Jim, I have not tried them myself, but I have them ready to try when I get the chance.  Won't shred or rust.  Pads are 3" x 6" x 5/16"

 

https://www.hardwareandtools.com/3m-10113na-scotch-brite-final-stripping-pads-6-inch-by-3-7-8-inch-2-pack-ulab-9266.html?gclid=EAIaIQobChMIzfXwh9C98wIVRnxvBB3mCgIlEAAYASAAEgJyx_D_BwE

[squonk 41,161]

Yup go to Lowes or what ever and buy a Scothbrite pad. Cut what you need and give the rest to the dishwasher in the family.

[stevasaurus 22,765]

Comes with 2 in a package, might do 6 Horse breathers...at least 4 for like $3.  

 

[oliver2-44 9,764]

Ok, I have a large box of red and green Scotchbrite pads in the shop. Currently using a red one to buff 2 traffic light mounting brackets

[Snoopy11 5,714]

1 hour ago, oliver2-44 said:

evilbay

 

 

Don

[8ntruck 7,021]

I'm not sure that I would use one of the abrasive coated versions of the Scotchbrite pads as a filter.  That provides a source of abrasives to get pulled into the engine.  The non-abrasive dish scrubber version would be OK.

[oliver2-44 9,764]

2 hours ago, 8ntruck said:

I'm not sure that I would use one of the abrasive coated versions of the Scotchbrite pads as a filter.  That provides a source of abrasives to get pulled into the engine.  The non-abrasive dish scrubber version would be OK.

Good point