Source for rear mower deck wheels

[Red Power 60]

Hey fellas, where can I get a pair or wheels for the deck on my 416? 42ish inch deck, wheels are about 5 3/4 diameter and have grease fittings on them.

Evidently previous owner never saw the fittings!

Thanks. 

[Maxwell-8 4,275]

these wheels are off an old compressor. They have sealed bearings.

[WHX?? 48,799]

Try this guy. I don't know if he's got the zerk ones or not tho. 

[Achto 27,511]

You can check here as well.

 

https://wheelhorsepartsandmore.com/product-category/tires-wheels/

[WHX?? 48,799]

Looks like Lowell's has got the zerk. 

[pacer 3,168]

There are MANY type of wheels that will work there (I think I've got one with HF wheels!) I have a bit of a hang-up on using greaseable wheels - that area is where the MOST dust gets to and to my thinking, I'd rather not have all that dust/dirt collecting/sticking to the grease. I prefer a bronze bushing type with NO grease.

[Red Power 60]

Thank you all!!

[Red Power 60]

2 hours ago, Maxwell-8 said:

these wheels are off an old compressor. They have sealed bearings.

Did you modify that deck to mulch? 

[Lee1977 6,648]

If the rubber has not worn through I have drilled then out and added a brass bushing.  The bushings I used are 3/4" OD and !/2" ID. The material Wheel Horse used in their deck wheels is not hard to drill.

 

[Maxwell-8 4,275]

10 minutes ago, Red Power said:

Did you modify that deck to mulch? 

Indeed have a small topic about it: 

 

[echris 1,425]

4 hours ago, WHX?? said:

Looks like Lowell's has got the zerk. 

Can confirm. I bought his ~$50 kit with rollers last year. All top notch.

And I GOT STICKERS a fridge magnet and a pen!

[Jeff-C175 7,199]

15 hours ago, echris said:

fridge Toolbox magnet

 

Fixed it for ya!

 

 

Edited October 6, 2021 by Jeff-C175

[76c12091520h 3,608]

5 hours ago, WHX?? said:

Try this guy. I don't know if he's got the zerk ones or not tho. 

In stock with the fittings !