1984 Work Horse GT-1600 REFRESH

[Horse Newbie 7,074]

1 hour ago, Moparfanforever said:

K&B Horse Parts has the latches listed for sale in the vendors section. 

 

Check out page 2.

Yes, thank you sir…

but I’m trying to not pay over $20 clams apiece for them…

[Horse Newbie 7,074]

22 minutes ago, kpinnc said:

 

I have NEVER done that. 

 

Decal looks good where it is. When you put the others on, it won't show. 

I’m leaving it… hey, Tarheels came in second, and that’s nothing to be ashamed of…

As far as I’m concerned, it’s done, except that I need to replace the air box maintenance decal, a rubber sleeve on the parking brake lever, get the correct shifter knobs ( I have 2 small ones and I believe the Hi-Lo is small and the regular shifter should be larger ).

All these little things are on the way…

 

Oh and I’m gonna order new rubber hood latches…

[SylvanLakeWH 25,598]

  
 

 

[Sparky-(Admin) 21,326]

She came out sweet!! 
  How ya gonna feel about getting it dirty doing yardwork?? 

[Lee1977 6,664]

15 minutes ago, Sparky said:

She came out sweet!! 
  How ya gonna feel about getting it dirty doing yardwork?? 

It will look better with some North Carolina red dirt on it.

[Horse Newbie 7,074]

19 minutes ago, Sparky said:

She came out sweet!! 
  How ya gonna feel about getting it dirty doing yardwork?? 

Even though I do have a plow ( for witch I still need a clevis hitch ) I don’t really have acreage… if she works much , it will be mostly cutting grass or pulling a lawn trailer. I still need to refurb her mower deck… If she works, it will be light work…

[Horse Newbie 7,074]

8 minutes ago, Lee1977 said:

It will look better with some North Carolina red dirt on it.

Can I at least enjoy her for a little while clean ? 

[Bill D 1,926]

Looking great 👍.  If you order the hood latches from ACTUS, let us know how they fit.

I think you should change the steering wheel to a 417 style wheel.  Makes steering easier and it is softer and more comfortable on your hands.  You have a super comfy seat, you need a steering wheel to match.

[Horse Newbie 7,074]

1 hour ago, Bill D said:

Looking great 👍.  If you order the hood latches from ACTUS, let us know how they fit.

I think you should change the steering wheel to a 417 style wheel.  Makes steering easier and it is softer and more comfortable on your hands.  You have a super comfy seat, you need a steering wheel to match.

Well now @Bill D, that does sound like a good idea… but would you do that if you had already tried like the dickens to remove the original steering wheel…and you COULD NOT get the roll pin that holds it to budge ? Guess I could have drilled it out…

I wanted the steering wheel off when I was taking it apart, but I was afraid I would tear something up.

Can someone post a pic of a 417 style steering wheel ?

 

And BTW, thank you for the compliment and the “thumbs up”.

Edited April 10, 2022 by Horse Newbie

[kpinnc 12,083]

That turned out great! 

 

And the first dirt don't hurt, but the first good scratch SUCKS! 

[ebinmaine 67,592]

4 minutes ago, Horse Newbie said:

 

Can someone post a pic of a 417 style steering wheel ?

 

 

Not the best pic. 

Might show what you want....

 

 

 

[Horse Newbie 7,074]

2 hours ago, ebinmaine said:

 

Not the best pic. 

Might show what you want....

 

 

 

Is that steering wheel bigger than what’s on a 1984 Work Horse GT-1600 ?

Because if it is bigger, then it will be awful close to the seat. The one on now seems closer to the seat than my 520H is…

could be the mounting holes on the new seat for the Work Horse were farther back, causing the seat to sit closer to the steering wheel.

I’ll have to check the old seat against the new seat and find out tomorrow.

[Lee1977 6,664]

I added about 3" to the steering column on my 312. I also raised the fender 1 3/4".

Edited April 10, 2022 by Lee1977

[ebinmaine 67,592]

39 minutes ago, Horse Newbie said:

that steering wheel bigger

Here's a picture with a ruler that's 12" long. 

 

 

[Bill D 1,926]

I would consider making a longer steering shaft and column cover then adding the 417 wheel.  I made a new column cover using 3/4"  NSF pipe, 1" PVC pipe and 1 1/2" NSF pipe.  I got the pipe in two foot lengths at Home Depot.

 

Edited April 11, 2022 by Bill D

[Horse Newbie 7,074]

Even though the 1984 Work Horse GT-1600 is 99.9999999% done, I have a question still, so I hope youse guys (learned that from @ebinmaine) will still tune in to this thread for a little while longer.

Still have 3 pages to 50…

 

At full throttle the 16 hp Briggs twin seems to have a constant “flutter”, if you will.

I describe it as a flutter because even though she runs strong and steady to me, I can hear a flutter… any suggestions as to what it may be ?

 

Maybe high speed adjustment needs tweaked ?…

Edited April 13, 2022 by Horse Newbie

[Jeff-C175 7,202]

8 minutes ago, Horse Newbie said:

youse guys

 

Mainers... jeeze... can't spell !

 

Every body knowz that it's  "youze guyz" !

 

Sorry, can't help with an answer.

 

@ebinmaine

[Handy Don 12,235]

16 minutes ago, Horse Newbie said:

t full throttle the 16 hp Briggs twin seems to have a constant “flutter”, if you will.

I describe it as a flutter because even though she runs strong and steady to me, I can hear a flutter… any suggestions as to what it may be ?

I'd need to hear it. Make a YouTube vid and post a link?

[SylvanLakeWH 25,598]

 

20 seconds of sound would be good…

[Horse Newbie 7,074]

@Handy Don and @SylvanLakeWH…

I did upload a video to YouTube. My YouTube channel is Tim’s DIY Club, or I will try to attach a link here.

 

I am using an iPhone and I am catching a fit trying to figure out how to upload videos to YouTube.

 

https://youtu.be/XzzOlpVop3Y

https://youtu.be/YSpj1FiU88Q

 

Edited April 14, 2022 by Horse Newbie

[Handy Don 12,235]

10 minutes ago, Horse Newbie said:

@Handy Don and @SylvanLakeWH…

I did upload a video to YouTube. My YouTube channel is Tim’s DIY Club, or I will try to attach a link here.

 

I am using an iPhone and I am catching a fit trying to figure out how to upload videos to YouTube.

 

https://youtu.be/XzzOlpVop3Y

https://youtu.be/YSpj1FiU88Q

 

Worked just fine. Can't say that I'm hearing anything off but maybe others will.

[Horse Newbie 7,074]

13 minutes ago, Handy Don said:

Worked just fine. Can't say that I'm hearing anything off but maybe others will.

Yeah for some reason my iPhone started letting me select videos when I hit “Upload a video”

 

Before it was asking me to record a video as the only option, and I already had a video or 3 I wanted to select… anyways,

I figured it would be hard to hear that flutter in the video. I can hear it LIVE, but I can’t hear it in the video either.  
 

It sounds fine to me in the video…

Edited April 14, 2022 by Horse Newbie

[SylvanLakeWH 25,598]

Sounds fine… 

[Bill D 1,926]

It sounds okay to me.  Is the Magneto new?  You could have a "leaky" plug wire causing the flutter you're concerned about.  Try adjusting the carb when it's warmed up.  Also consider switching to NGK plugs.  Some people here claim they're better than Champions.  Just my two cents.

[Horse Newbie 7,074]

@Bill D,

Got the rubber hood straps in for the Work Horse…

Thank you for helping me find them…

 

ACTUS MFG…

very nice gentleman on the phone… he said they sell at least a couple sets a month to people restoring tractors…

I will be installing these later this afternoon, but for now it’s back to the 48 inch SD deck underside POR-15 treatment.

Edited April 24, 2022 by Horse Newbie