Felix 145 #1 Posted September 28, 2021 Hi. Does anyone know what thickness gasket paper I need to make a gasket for the transaxle on c120 auto. 👍🏻👍🏻 Share this post Link to post Share on other sites
Achto 27,751 #2 Posted September 28, 2021 1 hour ago, Felix said: Hi. Does anyone know what thickness gasket paper I need to make a gasket for the transaxle on c120 auto. 1/64" should do the job for you. Share this post Link to post Share on other sites
squonk 41,321 #3 Posted September 28, 2021 https://wheelhorsepartsandmore.com/product/5955-102759-gasket-pump-wheel-horse/ 2 Share this post Link to post Share on other sites
Felix 145 #4 Posted September 28, 2021 It’s the gasket between the two casings I need. I’m in the uk so struggling to find one of the shelf. 👍🏻 Share this post Link to post Share on other sites
953 nut 55,767 #5 Posted September 28, 2021 You should do well with 0.4 mm thickness gasket material. Share this post Link to post Share on other sites
Skipper 1,788 #6 Posted September 29, 2021 (edited) All the ones I have here measure between 0.75 and 0.8mm. (1/32") Those are not the 5999 gasket though, so it might be thinner. But the 1/32 size seems to be all that is used for tillers, 8 speed and Eaton 1100 rears. Edited September 29, 2021 by Skipper Share this post Link to post Share on other sites
