Fordiesel69 263 #1 Posted September 13, 2021 I got a GT-1848 with a blown engine. I pulled the tranny and saved it. It had a hydralic lift and has the oil filter. So I assume it is the same olde eaton 1100 used on all red horses? Or does this one have a less durable transaxle bolted to the pumps. Share this post Link to post Share on other sites
pfrederi 17,865 #2 Posted September 13, 2021 Not an expert in GT series but if it has tranny filter on the left rear then about the only difference might be it has 1" axles and 4 pinion.... Share this post Link to post Share on other sites
c-series don 8,813 #3 Posted September 14, 2021 I can tell you that, that transmission has 1-1/8” axles, bought my Work Horse brand new in 1984 and it’s pretty much indestructible. Ran it for years with ground engaging implements, plus mowing commercially for 8 years. I have close to 20 🤔 of these tractors and that’s the last one I’d sell. I restored it a few years ago. Here it is. 1 3 2 Share this post Link to post Share on other sites
Fordiesel69 263 #4 Posted September 14, 2021 My gawd is that awsome looking. We also have a GT-1642 - 8 speed we owned since new and took the rotted 42" deck off and put on a 48". Still run it frequently. 2 Share this post Link to post Share on other sites
sgtsampay 117 #5 Posted February 2, 2022 On 9/13/2021 at 8:42 PM, c-series don said: I can tell you that, that transmission has 1-1/8” axles, bought my Work Horse brand new in 1984 and it’s pretty much indestructible. Ran it for years with ground engaging implements, plus mowing commercially for 8 years. I have close to 20 🤔 of these tractors and that’s the last one I’d sell. I restored it a few years ago. Here it is. How many hours do you have on it? With all of that mowing. 1 Share this post Link to post Share on other sites
kpinnc 12,379 #6 Posted February 3, 2022 You're correct, it's the Eaton 1100 with black paint. Just like the 300/400/500 series Wheel Horses. 1 Share this post Link to post Share on other sites
kpinnc 12,379 #7 Posted February 3, 2022 On 9/13/2021 at 8:42 PM, c-series don said: I can tell you that, that transmission has 1-1/8” axles, bought my Work Horse brand new in 1984 Don that thing is beautiful! 1 Share this post Link to post Share on other sites
c-series don 8,813 #8 Posted February 3, 2022 @kpinnc Thank you, it doesn’t look like it now but that tractor has thousands of hours on it! A true testament to Wheel Horse quality! 2 Share this post Link to post Share on other sites
c-series don 8,813 #9 Posted February 3, 2022 @sgtsampay The tractor doesn’t have an hour meter, but I sure as heck wish it did! I’m an equipment operator for over thirty years so I’m well aware how hours can add up on a machine (and my body 😂) I’m very confident it has well over 2000 hrs on it. 2 1 Share this post Link to post Share on other sites
