Atomic Babe

[oldiron613 583]

17 hours ago, Oldskool said:

Thanks Rob. 

I'm still guessing AB model B. It has Doylestown embossed on the rear housings in 3 different places.

If I can get past the magneto being a pain in my neck I might just get it going.

 

You bet, good luck! I have a single cylinder, Novo powered Atomic Babe model A and like those 2 cylinder Wisconsin engines. If you get tired of it, certainly keep me in mind. 

 

Thanks, Rob 

[Oldskool 6,643]

Just put the points and condenser in. Looks like I have good blue spark every turn. Tomorrow I'm going to get it timed and move onto the warped Zenith carb.

[Handy Don 12,204]

1 minute ago, Oldskool said:

Just put the points and condenser in. Looks like I have good blue spark every turn. Tomorrow I'm going to get it timed and move onto the warped Zenith carb.

Whoo Hooo! Good news.

[Oldskool 6,643]

29 minutes ago, Handy Don said:

Whoo Hooo! Good news.

Yes sir. One step closer 

[Oldskool 6,643]

I've been trying to get it timed. 

Still no kick from the engine, just alot of hand cranking. 

[ebinmaine 67,397]

For the sake of ease while you're trying to spin that beast over can you get a piece of rope strung between that engine and the PTO of another tractor and twist it like a figure 8 so they're both spinning the right way?

 

[Oldskool 6,643]

10 hours ago, ebinmaine said:

For the sake of ease while you're trying to spin that beast over can you get a piece of rope strung between that engine and the PTO of another tractor and twist it like a figure 8 so they're both spinning the right way?

 

Hmmmm that sounds like a good idea. I may have to try that.

[ebinmaine 67,397]

59 minutes ago, Oldskool said:

good idea.

I have only a limited quantity of those available per quarter. 

Lucky for me tomorrow's a new one. 

[slim67 2,735]

On 9/23/2021 at 10:38 AM, oldiron613 said:

 

You bet, good luck! I have a single cylinder, Novo powered Atomic Babe model A and like those 2 cylinder Wisconsin engines. If you get tired of it, certainly keep me in mind. 

 

Thanks, Rob 

I saw the other Atomic Babe owned by the guy I believe you got yours from. According to him they didnt have hoods? Anyways the one I saw was all motor, steel and tires. Would be cool to have seen one right off the assembly line. I never realized how many vintage garden tractors were out there.