earlleecliffton 38 #1 Posted August 28, 2021 Working on 416-8.where to buy these bolts with washer built in ? Share this post Link to post Share on other sites
squonk 41,649 #2 Posted August 28, 2021 Mc Master- Carr https://www.mcmaster.com/flange-head-screws/medium-strength-grade-5-steel-flanged-hex-head-screws/ Some hardware stores carry flange head bolts but not all. 1 Share this post Link to post Share on other sites
pacer 3,174 #3 Posted August 28, 2021 Ahhh, flange bolts/nuts! One of the nicer additions I started adding to my shop supply drawers. Few years ago I kept running across those and liked them .... so, I finally went to my local fastener store. Told the guy what I wanted and asked if I could go back to the bins with him, he agreed. I started in - 25 of these, 50 of those, 100 of these, etc etc, got the nuts too. I had a goodly supply of the 3 common ones --- 1/4-5/16-3/8" and was surprised that the bill was only around $50..... Bout all I use anymore. 1 Share this post Link to post Share on other sites
8ntruck 7,183 #4 Posted August 28, 2021 Who was your fastener guy? Fastenal? Share this post Link to post Share on other sites
earlleecliffton 38 #5 Posted August 28, 2021 What was the original finish on these bolts ? Share this post Link to post Share on other sites
pacer 3,174 #6 Posted August 28, 2021 @8ntruck @earlleecliffton This place is an independent, ran by same family for ....ever? Real dump of a looking place, but they have got about anything relating to fastening, and I'm usually surprised at the cost -- especially like compared going to HD or Lowes. When I'm rushed I'll go to Tractor supply, theyre not too bad with their "by the pound" pricing, and they are closer. Earlelee, while I see Mcmaster shows black (rather proud of them too!!) I have never seen them, all I've seen are the zinc plated in grade 5. Side note: I have a MF Garden tractor and Massey used only flanged hardware all thru the sheet metal, etc..... Share this post Link to post Share on other sites
earlleecliffton 38 #7 Posted August 29, 2021 Thanx all 1 Share this post Link to post Share on other sites
kpinnc 12,806 #8 Posted August 29, 2021 I would suggest staying away from the ones with the little "cup" on top. Just another place to hold water and/or crud. Potential spot to start rusting. 3 Share this post Link to post Share on other sites
earlleecliffton 38 #9 Posted August 30, 2021 (edited) found some at a place less than 10 miles from me i didnt know about, northern industrial supply, bryan ,ohio419-630-3829 im happy Edited August 30, 2021 by earlleecliffton Share this post Link to post Share on other sites
