Rick 55 BB 24 #1 Posted August 26, 2021 I was wondering if anyone makes a formed seat cover to replace the original covers for stock seats , I haven't been able to locate anything like a kit with a formed cover and a pinch molding . I have 2 520 H seats that have seen better days and like to replace them . The seat pans are in good shape and don't really want to put an after market seat on them . Thanks , Rick Share this post Link to post Share on other sites
lynnmor 7,388 #2 Posted August 26, 2021 The Milsco 174101 or V-818 seats used the same pattern for the soft goods, unfortunately they are now out of production. Milsco was Michigan Seat Company and they were the original manufacturer of your seats. Do some searching, maybe you can find some old stock. If you can locate some seats, you can then transfer the material or add new mounting holes to the new seats. Let me know if you find any, I do know there was a site that deals with obsolete goods that was selling them cheap. Share this post Link to post Share on other sites
WheelPuke 77 #3 Posted September 3, 2021 On 8/26/2021 at 1:33 PM, lynnmor said: The Milsco 174101 or V-818 seats used the same pattern for the soft goods, unfortunately they are now out of production. Milsco was Michigan Seat Company and they were the original manufacturer of your seats. Do some searching, maybe you can find some old stock. If you can locate some seats, you can then transfer the material or add new mounting holes to the new seats. Let me know if you find any, I do know there was a site that deals with obsolete goods that was selling them cheap. Would this be the same case for the 414-8 seats? I’m in a similar position as @Rick 55 BB. I put a replacement on for now but the original seat pan and foam is good still. Plus the original seat is way better than the replacement I put on. 1 Share this post Link to post Share on other sites
