HorseFixer 2,012 #1 Posted August 22, 2021 Help Please I need help on Identifying a 953 / 1054 tractor. Where is he Model % Located at? It also may be a GT-14 . Thanks Duke 2 Share this post Link to post Share on other sites
Racinbob 11,093 #2 Posted August 22, 2021 Sorry I can't help with your question but it's good to see you back. Unless I've just missed it but I haven't seen you in a while. 3 Share this post Link to post Share on other sites
Pollack Pete 2,273 #3 Posted August 22, 2021 Pictures would help.I can surely tell the difference between a 953/1054 and a GT-14 if I saw a pic. 1 Share this post Link to post Share on other sites
953 nut 55,316 #4 Posted August 22, 2021 The 953/1045 have a three speed transmission, stamped steel rear fenders that are a welded unit and the hood is attached with bolts. The GT-14 has a Sundstrand hydromantic transaxle, rear fenders that are made up of multiple pieces and the hood is hinged with a latch at the front. 953 GT-14 3 1 1 Share this post Link to post Share on other sites
oliver2-44 9,759 #5 Posted August 22, 2021 Buy it and we’ll help you figure out what it is when you get it 🏡 3 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,496 #6 Posted August 22, 2021 Go to our gallery section and you can pull up images of the 953, the 1054 and the GT-14. Here is one of a '71 GT-14: 2 1 Share this post Link to post Share on other sites
Herder 2,354 #7 Posted August 22, 2021 Late 60's GT-14 with a 3 point lift. 1964 1054 The opportunity to buy 953's,1054's and GT's doesn't come along often. A lot of the time the 953 & 1054 are stripped of the hyd. lift. In the pic above, the lever with the black nob is for the lift. The PTO clutch & hub are specific to these tractors as well and a bit hard to find. The more complete the better. Good luck. 1 Share this post Link to post Share on other sites
HorseFixer 2,012 #8 Posted August 22, 2021 Sell here are some pitures, They are really SUCKY this guy contacted me cause I'm the Wheel Horse guy in this neighbor hood, So I am just helping him sell his tractor. Its pretty worn as you can tell by the pictures altho I have seen worse and seen better I have resected many that didnt have as many BONES as this one, the 953 and 1054 i have had both but cant remember jwhere the model tag is so I can look it up in TORU PARTS VIEWER. Sorry for the sucky pictures my cell phonr must have a dirty lens Where Is The Model # Tag Location?. Thanks ~Duke 1 1 Share this post Link to post Share on other sites
Pullstart 62,911 #9 Posted August 22, 2021 I’m sure @953 nut can correct me if I’m wrong, but that steering wheel looks like an early 953 wheel to me. 1 Share this post Link to post Share on other sites
squonk 41,152 #10 Posted August 22, 2021 Yup early wheel. Most valuable piece on the whole tractor if it can be taken off with out breaking it. Share this post Link to post Share on other sites
Herder 2,354 #11 Posted August 22, 2021 I've dragged home worse. Share this post Link to post Share on other sites
953 nut 55,316 #12 Posted August 22, 2021 6 hours ago, HorseFixer said: Where Is The Model # Tag Location?. It is located on the sides of the hood, but the serial number is a 1054. 1 Share this post Link to post Share on other sites
953 nut 55,316 #13 Posted August 22, 2021 6 hours ago, squonk said: it can be taken off with out breaking it A bearing splitter would be the proper tool for the job. If you don't have one a lot of auto parts stores will lend them out. Share this post Link to post Share on other sites
