Sailman 1,291 #1 Posted July 10, 2021 Thanks to the kind folks here who have helped me sustain the wheel horse bug.... Have wanted a C-160 with Kohler engine and 8 speed transmission for a plowing tractor. Transmission in the GT-14 is bad Found a nice original 1986 416 -8 with the K341 engine but I want to make sure it will take the push blade I use on my C-120 A. Also are the mule / mower attachments the same as C series? Also does it allow for a cable system to raise and lower a brinley hitch from the rear? Had a nice 3 point hitch set up on the GT-14 . All other comments pro or con on this model would be greatly appreciated. I was partial to the C series tractors but this looks to be as good or better. Ideas on a fair price? 1 Share this post Link to post Share on other sites
oliver2-44 9,709 #2 Posted July 10, 2021 It will use all the same implements as a C series and will use a Sleeve hitch and cable for Brinly implements. May need a cable installed 1 Share this post Link to post Share on other sites
Lee1977 6,648 #3 Posted July 10, 2021 (edited) It won't be as easy to change attachments as the older C-series. The lift under the tractor harder to get to. I try not to change equipment only once or twice a year on my 312-8.. Edited July 10, 2021 by Lee1977 1 Share this post Link to post Share on other sites
