kpinnc 12,088 #1 Posted July 9, 2021 (edited) So we moved about three years ago, and I've not had a decent shop ever since. I have my old utility building, but it still isn't set up right. I've had no choice but to take over the garage (our trucks won't fit in it anyway) and it just isn't the same. No 220 AC, and only a couple 110 outlets to work with. No work bench and no welding table at all. So today I built a welding table. My wife took a picture while I was welding it standing upright, and asked me what it was. I told her it was Shark Week, and I was building my own cage. She shook her head and went back inside. But it turned out great. 6 feet long, 2 feet wide and 38 inches tall. All 1/4 inch steel, and set on casters. Now I can at least work, then move it and clean up, and set back up easily. I may drop some plywood in the bottom and put my welder in there. Edited July 9, 2021 by kpinnc 8 4 Share this post Link to post Share on other sites
ebinmaine 67,605 #2 Posted July 9, 2021 3 hours ago, kpinnc said: asked me what it was. I told her it was Shark Week, and I was building my own cage. She shook her head and went back inside Trina would come back with a scuba mask and say good luck! Nice work on that table! 5 Share this post Link to post Share on other sites
SylvanLakeWH 25,600 #3 Posted July 9, 2021 44 minutes ago, ebinmaine said: Trina would come back with a scuba mask and say good luck! After she soaked it in some tuna fish oil… ——————- @kpinnc nice job!!! 5 Share this post Link to post Share on other sites
Ed Kennell 38,225 #4 Posted July 9, 2021 7 hours ago, kpinnc said: . I told her it was Shark Week, and I was building my own cage. I coulda used that last week. We didn't have a net and it got kinda tense boating these toothy critters by hand. 5 Share this post Link to post Share on other sites
19richie66 17,508 #5 Posted July 10, 2021 On 7/9/2021 at 4:44 AM, ebinmaine said: Trina would come back with a scuba mask and say good luck! Nice work on that table! That does look handy. I have a 3x5 table I built but some genius put it in the back of the shipping container. I do not have any power at all. Have to go down to a friend’s house and use his 220v for my welder which stays in his garage for the time being. Hope to remedy this soon. At least you have a concrete floor and a roof. 👍 2 1 Share this post Link to post Share on other sites
ebinmaine 67,605 #6 Posted July 10, 2021 6 minutes ago, 19richie66 said: some genius put it in the back of the shipping container Nowhooodadunnthat??? 2 Share this post Link to post Share on other sites
kpinnc 12,088 #7 Posted July 17, 2021 (edited) Added a vise and shelf for the welder. I'll add holders for my shielding gas tank once I finally get up the nerve to buy one. Running flux core for now. Edited July 17, 2021 by kpinnc 4 Share this post Link to post Share on other sites
